Bobbins: Ferrite & Core Forms
EFD-15 Surface Mount Bobbin
10 Pin
Click here for PDF file
(ICF) 30382
Bobbin & Base EFD-15 surface mount bobbin. 10 pin. 500 pcs per case.
25¢ each - 20¢ (50+), 15¢ (500+) (case)
Pot Core PC Bobbin
6 x 2 Pins
(ICF) 34815
Bobbin & Base pot core PC bobbin. 6 x 2 pins. Two winding areas. 0.2" high each. 0.444" inside diameter, 0.818" outside diameter.
25¢ each - 20¢ (50+), 16¢ (500+), 12¢ (2k+)
Pot Core PC Bobbin
Pot Core PC Bobbin
(ICF) FN6/1-5
Single pot core PC mount bobbin. Winding area 0.28" inner diameter x 0.25" high x 0.47" outer diameter. 3 pins on one side, 2 pins on the other. 0.75" max width.
20¢ each - 16¢ (25+)
Ferrite Core Housing
Ferrite Core Housing
(ICF) 137-56428-01
Ferrite core housing. 16 pin dual row. 0.037" pin width, 0.2" pitch, 8 pins per row, 1.295" row width. Center chase has slide walls 0.15"H, 0.097" thick to hold ferrite core. 1.1" wide x 1.81" deep overall.
$1 each - 75¢ (25+)
Bobbin & Base - 8 Pin
Surface Mount Plastic Housing
(ICF) 34356
Bobbin & base. 8 pin surface mount "plastic housing". Internal well can accomodate a ferrite core with windings attached to surface pins. Internal dimensions: 0.3" x 0.33".
NOTE: One case = 25,000 pcs.
20¢ ea - 15¢ (50+), 12¢ (500+), 8¢ (5K+), 6¢ (25K+)
Bobbin Transformer
Enlarge Image | More Images | More Images | More Images
(ICF) 200-21352
NY-Glass Plastics Inc. Bobbin transformer, PCB mount, 15 pin. MFR-NY-Glass Pastics Inc, USA. Bobbin EE/EI-50. 1-27/32" L x 2" W x 1-11/16" H. 0.857" W x 0.20" Max HT winding area.
$2 each - $1.50 (25+)
Bobbin E-Core
(ICF) 200-28256
Bobbin, designed for E-core. PC mount. 8 pin. 9/32" x 9/32". 3/8" winding area. 0.15 pin spacing. 3/16" x 3/16" internal dimensions, 9/16" external dimensions.
20¢ - 16¢ (25+), 12¢ (250+)
Round Bobbin/Coil Former
Enlarge Image
(ICF) 200-64650
Round Bobbin/Coil former. Black thermoplastic. 1.09" HT winding area, 0.62" innder DIA, 0.652" DIA post, 1.265" upper/lower flange, 1.73" total height, 1/2 " mounting ears w/ 0.125" I.D. holes, unthreaded. Made in USA.
$1.50 - $1.25 (25+), $1.00 (100+)
Transformer Bobbin
Horizontal Mount
(ICF) BER35AHP16T
Elite Magnetics Inc. transformer bobbin. Horizontal mount. 35mm. 16 pin with 5mm spacing. 1-23/32" x 1-9/16" x 1-1/8". Use this bobbin with (ICH) PC40HEER35-Z E core.
*** SOLD OUT ***
Bobbin
Vertical PCB Mount
(ICF) ERL35YW160
Bobbin vertical PCB mount. 35mm. 14 pin PC mount base. 5mm spacing. 1-3/8" x 1-17/32" x 1-3/32". Use this bobbin with (ICH) PC40HEER35-Z E core.
$2 each - $1.75 (5+), $1.35 (100+)
Bobbin
Vertical PCB Mount
(ICF) YW066ER4215
Bobbineer vertical mount bobbin. 42mm x 15mm. 18 pin with 5mm spacing. 1.75" x 1.26" x 1.63"H. use this bobbin with (ICH) OP44216A081 E core.
$2 each - $1.75 (5+), $1.50 (26+), $1.25 (200+)
Transformer Bobbin
(ICF) 24045119812
Cosmo transformer bobbin. 0.645" inside diameter. 0.83"L winding area. 1.75" x 1.28" x 1.25". Use this bobbin with (ICH) E6253E2A E core.
*** SOLD OUT ***
Transformer Bobbin
(ICF) 8-7030-0
Cosmo transformer bobbin. 0.52" x 0.52" opening. 0.73"L winding area. 1-3/32" x 1-3/32" x 13/16". Use this bobbin with (ICH) 7099-41-16-12-0001 E core.
75¢ ea - 60¢ (5+), 50¢ (25+), 38¢ (100+), 25¢ (500+)
Transformer Bobbin
(ICF) 722D3980FR
Plastron transformer bobbin. PCB mount. 4 pin. Dual winding area, each measures 0.185" wide. 0.263" x 0.272" center hole inside. 1-1/32"L x 13/16"W x 25/32"H. Use this bobbin with (ICH) B66315GX130 E core.
$1 each - 90¢ (100+)
Bobbin Coil Form
PC Mount
(ICF) TF4007EI40
Taiwan / Shulin Ent. bobbin coil form. Vertical 6 pin. 0.241" inner diameter, 0.175" high wind area. 0.675" c-c pin rows, 0.145" pitch. Fits EI-40 cores.
25¢ each - 20¢ (50+), 17¢ (250+), 14¢ (1k+)
Plastron Bobbin
Enlarge Image
(ICF) 7020-01-516F
Plastron bobbin. EI-175 x 2.50. Inside dimensions: 2.496" x 1.78". Overall dimensions: 4-1/2" x 3-5/8" x 3"H. Outer winding area: 2.65" x 1.94". Power One P/N: 7020-01-516F. Plastron P/N: 200-52530.
$5 each - $4.25 (10+), $3.50 (50+)
Pot Core PC Bobbin
(ICF) BP18/11-714D
TDK pot core PC bobbin. Single winding area 0.2" high 0.347" winding core. Four thru-hole leads 0.42" c-c-c. 0.572" outer diameter. Alt P/N: BG-714001, 129-50416-03.
20¢ each - 15¢ (50+), 11¢ (500+)
Pot Core PC Bobbin
(ICF) BP22/13-724
TDK pot core PC bobbin. Dual winding area 0.131" high each. Four thru-hole leads 0.5" c-c. 0.377" inside diameter, 0.685" outside diameter.
20¢ each - 15¢ (50+), 11¢ (500+)
Bobbin Coil Form
Surface Mount
(ICF) 33772
Bobbin & Base surface mount bobbin. 12 pin. Winding area measures: 0.335" O.D., 0.178" I.D., 0.118" high.
20¢ each - 15¢ (50+), 11¢ (500+), 7¢ (5k+)
Bobbin Coil Form
PC Mount
(ICF) 938C-51-80GF
Plastron bobbin. PC mount. 4 pins, 0.2" c-c. Dual winding area. External dimensions: 0.542" x 0.542" x 0.455"L. Internal dimensions on barrel: 0.205".
20¢ each - 16¢ (25+), 12¢ (250+), 10¢ (1k+)
Bobbin Coil Form
PC Mount
(ICF) FORM-B5
Bobbin coil form, PC mount. 3/8" diameter x 0.3" high.
*** SOLD OUT ***
PC Pot Core
PC Mount - 2 x 2 Pins
(ICF) FN6/1-4
Siemens bobbin. Designed for pot core, PC mount. 2 x 2 pins. 0.260" inner diameter. 0.25" wind area.
20¢ each - 16¢ (25+)
EP-13 Bobbin
9 Pin / PC Mount
Shown with EP Cores
(not included)
(ICF) PHC36369
Pin Shine-Dongghan EP-13 bobbin. Fits EP-13 cores. 9 pin (position 3N0), PC mount. "Red Icons". Pin length = 4.57 mm. Notice the nipple stubs on each terminal. 97,000 available!!
25¢ each - 19¢ (100+), 15¢ (1,000+)
Bobbin Coil Form
Click here for diagram
(ICF) 2616F10
Bobbin coil form. Designed for 2616 pot core. 0.45" inner diameter, 0.425" winding area height.
22¢ each - 17¢ (25+)
EP-13 Bobbin
9 Pin / PC Mount
(ICF) PHC-363N
EP-13 bobbin. Fits EP-13 cores. 9 pin, PC mount. No nipples. Pin length = 0.197" (5mm). Pin pitch 0.1" c-c.
20¢ each - 15¢ (100+)
EP-13 Bobbin
10 Pin / PC Mount
(ICF) 31688
EP-13 bobbin. Fits EP-13 cores. 10 pins, PC mount. Notice the nipple stubs on each terminal. Pin length = 0.18" (4.57mm).
15¢ each - 10¢ (100+), 7¢ (1,000+)
EP-13 Bobbin
10 Pin / PC Mount
(ICF) 36779
EP-13 bobbin. Fits EP-13 cores. 10 pin, PC mount. Pin length = 0.118" (3mm). 36,000 available!!
20¢ each - 15¢ (100+), 7¢ (1,000+), 3¢ (10,000+)
EP-13 Bobbin
10 Pin / Surface Mount
(ICF) 25966
Bobbin & Base EP-13 bobbin. Fits EP-13 cores. 10 pin, surface mount. Post hole measures 0.182" inside diameter. 0.299" long winding area. 140,000 available!!
20¢ each - 15¢ (100+), 12¢ (1,000+), 8¢ (10,000+)
Bobbin Coil Form
Click here for diagram
(ICF) 3019-1
Bobbin coil form. 30/19 pot core. 0.540" inner spool diameter, 0.575" outer spool diameter, 0.500" winding area height. 0.976" flange diameter.
25¢ each - 20¢ (25+)
Bobbin E-Core
(ICF) D790859-A
Bobbin, designed for E-core. 5 terminal holes per side. 0.575" square, 0.715" winding area height.
20¢ each - 15¢ (25+)
TDK Rectangular 8 Pin Bobbin
PC Mount
(ICF) BEC10118CPS
TDK rectangular 8 pin bobbin, designed for PC mount. 0.33" wide lead spacing. 3/8" x 3/8" x 11/32".
25¢ each - 20¢ (50+)
Plastron Bobbin Coil Form
PC Mount
(ICF) 1215-01GF
Plastron bobbin coil form, designed for PC mount. 5 x 3 terminals, 0.990" center - center. Internal dimensions: 0.390" x 0.265", 0.418" winding area.
50¢ each - 35¢ (25+)
Plastron Bobbin Coil Form
PC Mount
(ICF) 575-33
Plastron bobbin coil form, designed for PC mount. 3 terminals on each end. 1.05"L winding area. 0.260"H x 0.265"W. 1.3" center - center pins.
50¢ each - 35¢ (25+)
Plastron Bobbin Coil Form
PC Mount
(ICF) 0823-31-80GF
Plastron bobbin coil form, designed for PC mount. 6 x 6 terminals, 1" center - center. Internal dimensions: 0.267" x 0.525", 0.425" winding area.
65¢ each - 50¢ (25+)
Plastron Bobbin Coil Form
PC Mount
(ICH) 726B-32-80GF
Plastron bobbin coil form, designed for PC mount. 6 terminals per side, 0.95" center - center pins. 0.515" square, 0.7" winding area.
75¢ each - 60¢ (25+)
Plastron Bobbin Coil Form
PC Mount
(ICF) 1003-33-90FR
Plastron bobbin coil form, designed for PC mount. 7 x 7 terminals, 1.0" center - center. Internal dimensions: 0.27" x 0.525", 0.43" winding area.
85¢ each - 70¢ (25+)
Plastron Bobbin Coil Form
PC Mount
(ICF) 1771-32-80GF
Plastron bobbin coil form, designed for PC mount. 4 x 4 terminals, 0.5" center - center. 0.265" square internal dimensions, 0.42" winding area.
30¢ each - 20¢ (25+)
Plastron Bobbin Coil Form
(ICF) 2443-30-80FR
Plastron bobbin coil form. No pins. 0.445" square post hole, 1.17" winding area. Mates with (ICH) PC40EE30/42/11-Z.
NOTE: The picture on the right shows how EE cores mate with this bobbin. The EE cores are NOT included in this price.Click here to purchase EE cores.
50¢ each - 35¢ (5+), 25¢ (26+), 15¢ (200+)
Plastron Bobbin Coil Form
PC Mount
(ICF) 110E-42-80FR
Plastron bobbin coil form, designed for PC mount. 4 x 5 terminals, 0.6" center - center. Internal dimensions: 0.260" square, 0.425" winding area.
40¢ each - 27¢ (25+)
Plastron Bobbin E-Core
PC Mount
(ICF) 705-31
Plastron bobbin coil form, designed for E-core. 2 winding spaces, 1/2" each. Internal dimensions: 1.107" x 0.770".
*** SOLD OUT ***
Bobbin Coil Form
PC Mount
(ICF) 230-0127
Bobbin coil form, designed for PC mount. 2 x 4 terminals, 1.1" center - center. 2 winding spaces, 0.400" each. Internal dimensions: 0.640" square.
75¢ each - 60¢ (25+)
Wall Cube Bobbin
(ICF) 1865A-31-70GF
Wall cube bobbin. Designed for wall cube, AC / plug. 0.390" square. Dual winding area, 0.315" each.
50¢ each - 35¢ (25+)
Plastron Bobbin E-Core
(ICF) 1865-A31-70-6F
Plastron bobbin, designed for E-core. 2 x 3 terminals. Internal dimensions: 0.390" square. Dual winding area, 0.310" each.
60¢ each - 50¢ (25+)
Bobbin
(ICF) 2X1.275
Bobbin, designed for E-core. Dual winding area, 0.34" each. Dimensions: 1.275" x 0.502" inside. 1.1" x .795" x 1.89" outside.
$1 each - 85¢ (25+)
Plastron Bobbin E-Core
(ICF) 19-03-10GF
Plastron bobbin, designed for E-core. Dual winding area, 0.490" each. Internal dimensions: 0.770" square.
50¢ each - 38¢ (25+)
Bobbin E-Core
(ICF) 232-0023103
Bobbin, designed for E-core. Internal dimensions: 0.615" x 0.5". 1.025" winding area.
50¢ each - 40¢ (25+)
Plastron Bobbin E-Core
(ICF) 0210-0210GF
Plastron bobbin, designed for E-core. Internal dimensions: 1.03" x 0.890". 1.19" winding area.
85¢ each - 65¢ (25+)
Bobbin E-Core
(ICF) 134-01-RN
Bobbin, designed for E-core. Internal dimensions: 1.025" square. 1.37" winding area.
*** SOLD OUT ***
Bobbin C-Core
(ICF) 163-01-10RN
Bobbin, designed for C-core. Internal dimensions: 1.285" square. 1.68" winding area.
$2 each - $1.50 (25+)
Cosmo Rectangular
Bobbin C-Core
(ICF) 26-08518-1
Cosmo rectangular bobbin, designed for C-core. Internal dimensions: 2.40" x 1.52". 2.06" winding area.
$2.50 each - $2 (25+)
Clip with PC Stake
(ICF) 34814
Bobbin & Base clip with PC stake. Snap one on each side of core assembly and PC mount. 16mm (0.63") span. 1.9 million pieces available.
10¢ ea - 8¢ (100+), 5¢ (1k+), 3¢ (10k+), 2¢ (100k+)