Toroids - Micro Metals / Iron Powder
Micro Metals
Iron Powder Toroids
Iron Powder Toroids
2 Mix (Red) 1-30 MHz, high volume resist. u=10
6 Mix (Yellow) 1-50 MHz, similar to mix #2. u=8
8 Mix (Yellow / Red) 1-50 MHz, replaces 6 mix. u=35
17 Mix (Blue / Yellow) 50-200 MHz, good Q. u=3
18 Mix (Green / Red) N=55, Low Core Loss, Similar to 8 Mix
26 Mix (Yellow / White) DC-800 KHz, great 60 Hz.
EMI range. Line 'em up on speakers / AC wires u=75
40 Mix (Green / Yellow) Power conversion similar to mix 26
52 Mix (Green / Blue) DC-1 MHz, high perm. u=75
6 Mix (Yellow) 1-50 MHz, similar to mix #2. u=8
8 Mix (Yellow / Red) 1-50 MHz, replaces 6 mix. u=35
17 Mix (Blue / Yellow) 50-200 MHz, good Q. u=3
18 Mix (Green / Red) N=55, Low Core Loss, Similar to 8 Mix
26 Mix (Yellow / White) DC-800 KHz, great 60 Hz.
EMI range. Line 'em up on speakers / AC wires u=75
40 Mix (Green / Yellow) Power conversion similar to mix 26
52 Mix (Green / Blue) DC-1 MHz, high perm. u=75
|
Powdered Iron Toroid
(ICH) T60-18
Powdered iron toroid. Al = 345. T60. Green / red. 0.336" inside diameter, 0.600 outside diameter.
50¢ each - 39¢ (25+)
Micrometals Toroid
(ICH) T400-30D
Micrometals toroid. Perfect for high power UPS choke. Ref permeability = 22 µ0. AI = 81, A = 6.85 cm2, V = 171 cm3, I = 25 cm. 4" diameter, 2.25" inner diameter, 1.30" high.
$45 each - $40 (3+)
Phenolic Spools
(ICH) MM-T51-0
0.5" outer diameter, 0.5" high,
0 mix, 12 uH / 100T.
$1 each -
90¢ (10+), 80¢ (25+)
Phenolic Toroids
Non-Metallic cores for use above 200 MHz
Non-Metallic cores for use above 200 MHz
(ICH) MM-T130-0
1.3" outer diameter, 0.437" high,
0 mix, 15 µH / 100T.
$3 each - $2.40 (10+),
$2 (25+)
(ICH) MM-T80-0
0.80" outer diameter, 0.25" high,
0 mix, 8.5 µH / 100T.
$1 each - 90¢ (10+),
80¢ (25+)
(ICH) MM-T50-0
0.50" outer diameter, 0.19" high,
0 mix, 6.4 µH / 100T.
80¢ each
- 70¢ (10+), 60¢ (25+)
14-1/2 Turns, #16 Enameled Wire
on a Micro Metals T106-6 Toroid
on a Micro Metals T106-6 Toroid
(ICH) MM-T106-6C
#16 enameled wire on a Micro Metals T106-6 toroid. 1.06" O.D., 0.437" high, 0.562" I.D., yellow 6 mix, 1 - 50 MHz, u=8.
$2.50 each - $2.25 (10+)
T100-2 Toroid
1.3 µH
1.3 µH
(ICH) HC14L0033
Micro Metals T100-2 Core. 1.3 µH Toroidal transformer. Wound with 8 turns, 16 gauge wire. 1 - 30 MHz. 1" O.D. Red. 5,900 available!!
$2.75 each - $2.50 (10+), $2.25 (25+), $1.80 (100+)
Bi-Filar T200-8 "RF"
Toroid
Toroid
(ICH) CHT510084H
Micro Metals T-200-8A Toroid. New HF mix (Yellow / Red). Bi-Filar Winding. Fiberglass sleeving on leads. 2" O.D. 3/4" High. 5,800 Available!!
- Primary: 80 Turns #14 (426 µH)
- Secondary: 8 Turns #14 (4.67 µH)
- Reference Permeability: 35
- Material Density: 6.5
- Temperature Coef. of Permeability: 255
- Coef. of Linear Expansion: 10
- Thermal Conductivity: 29
$10 each - $9.50 (10+), $9 (25+),
$8 (100+)
23 Turns, #14 Wire on a
Micro Metals Toroid - 29 µH
Micro Metals Toroid - 29 µH
(ICH) MM-T130-8
Chung Hing Ind. 23 turns, #14 wire on a Micro Metals toroid. 29 µH. 1.30" diameter x 0.450" height. Mix = 8, Yellow / Red.
$2.95 each - $2.50 (10+), $2.25 (25+), $2 (100+)
Toroid Base with Pins
(ICF) SC5
Shen Zhen toroid base with pins. PC base for toroid winding.
4 legs. Can use up to a T25 toroid. 7mm (0.270") diameter well.
25¢ - 20¢ (10+),
16¢ (100+), 12¢ (1K+),
9¢ (10K+)
The Perfect Toroid Wire
PTFE - 14 AWG
PTFE - 14 AWG
(WTF) 21401AUL60A
Perfect toroid wire!! PTFE, 14 AWG, black solid tinned. 200ºC, 600v. Mfg: Dearborn.
65¢ per foot - 52¢ (100+ ft)
$450 for 1,000 foot roll