Split Beads - Ferrite

Ferrite Split Beads are the best form of field applied prevention for RFI and EMI noise suppression available. Protects against dangerous surges and spikes from power line, antenna coax, telephone and data wires caused by erratic power, lightning, back emf or any one of a dozen other sources. Beads have a variety of ferrite mixes. See individual specifications.

(ICH) HS135-26

Micro Metals buss bar, split ferrite "C" core. 26 mix, yellow. Use bus bar cores for filtering of output bus in switch mode power supply. Our super, low-profile is rated at 135 amps. Clamp around bus bar and ty-wrap or tape in place. 3/8" length, 0.718" x 0.3125" x 0.100" x 0.5". Sold in pairs.

$2.50 p/pair - $2.25 (10+ pairs), $2 (100+ pairs),
$1.75 (500+ pairs), $1.50 (2,500 pairs)

Enlarge Image | Alt Image

(ICH) 74271308

Ferrite Split Core worth set of 17 pcs with clamp. .323" ID. 1.173" OD, .791" H. 93 Ω @ 100mHz.

$49

(ICH) 044-3164151B

1/2" inside diameter fits over larger coaxes like RG-213, RG-8, RG-214, large telephone and data cables, power cables, etc. Add one, two or more, depending on severity of problem. Almost any interference problem can be eliminated with our split beads. Overall dimensions are 1" x 1" x 1-1/8" long. Made with 43 material.

$4 - $3.50 (6+), $3 (25+)

(ICH) 264-3164151

Same identical Fair-Rite brand as left but plastic cage NOT INCLUDED. These can be secured with ty-wrap (included) or tape. Made with 43 material.

$3 per pair - $2.50 (6+), $2.17 (25+)

Enlarge Image | Alt Image

Click here for PDF file

(ICH) 0446167281

Fair Rite Products Corp snap bead band suppression ferrite filter. Hinged (snap on) 190 ohm at 100MHz, material #46. Mounting type: Free hanging, 0.400 inner dia. 0.933"W x 0.460"H x 1.550"L. NSN: 5915-01-575-0835.

$2.50 each - $2 (6+) - $1.75 (25+) - $1.47 (100+)

Enlarge Image

Click here for PDF file

(ICH) 28A3851-0A2

Laird-Signal Integrity Products 1/2" ferrite split bead. 28A series, hinged (snap on), free hanging, 260 ohm at 100 mHz. Material 28. Data sheet, 2016 DC. 1.327"L, 0.512" inner diameter, 1.181" outer diameter.

$7 each - $6 (6+) - $5 (25+) - $4 (100+)

Enlarge Image

(ICH) CS28B2000

FerriShield® split core jumbo ferrite bead. RoHS compliant. 380 ohms @ 100 MHz. 2.35" diameter x 1.81" high. 0.96" inner diameter. NOTE: Remaining stock has small chips in ferrite material.

$24 each - $21 (6+)

(ICH) SS28B2033

Fair-Rite brand 3/8" inside diameter of bead fits over medium size coaxes like RG-59, RG-8X, telephone and data cables, power cables, speaker wires, antennas, etc... Removable, reusable plastic cage is included. Grip teeth reduce hole diameter to about 5/16" but can be whittled out to full 3/8". Just snap on one, two or more, depending on severity of problem. Almost any interference problem can be eliminated with our split beads. Overall dimensions are 13/16" square x 1-1/4" long. Made with 43 material.

$2.50 p/bead, $2 (6+), $1.75 (25+), $1.47 (100+)

(ICH) 264-3164251

1/4" bead with no plastic cage. 275 Ω at 100MHz, Does not include snap cage so use a tywrap TO SECURE. Use to suppress unwanted interference up to 200MHz. Made with 43 material. 0.591" width squared.

$1.25 each - $1 (25+)- $75¢ (100+)

(ICH) 264-750

Same 43 material as above beads. This jewel opens up to 3/4" ID. Includes plastic fastening cage as pictured.

$13 each - $11.90 (6+)

Enlarge Image

Click here for PDF file

(ICH) 264-3164251

Fair-Rite Product Corporation 1/2" ferrite split bead hinged (snap on), free hanging, 205 ohm @ 100 mHz, material #46. 0.514" innder diameter x 1.220"W x 0.600"H.

$4 each - $3.35 (6+) - $2.90 (25+) - $2.69 (100+)

Welcome! Thank-you for visiting our online surplus electronic super store.