Medium Bi-Pin Fluorescent Lampholders - Low Profile, Straight In - 661 Series
These lampholders, molded of white thermosetting urea, feature straight-in, double edge contacts for positive lamp grip. Quickwire pressure terminals are available with No. 20 AWG and No. 18 AWG mounting grooves. The 661 Series lampholders are designed for fast wiring for T8 or T12 medium Bi-Pin U-Bent Lamps.
Fluorescent Lampholder
No Nut Slot
No Nut Slot
(LMP) 661A-168
Medium bi-pin fluorescent lampholder for T8 or T12 U-Shaped lamps. No nut slot. 18 ga. top, 20 ga. bottom slots.660w / 600v. 1-19/32"H, 1-11/32" floating action base. Lampholders are suitable for use in fixtures designated for damp or wet locations. Made by
Triboro. CSA - UL Listed.
NOTE: 1,000 pcs = 1 case.
NOTE: 1,000 pcs = 1 case.
75¢ each - 50¢ (10+),
25¢ (50+), 15¢ (1,000+)
(case)
Fluorescent Lampholder
With Nut Slot
With Nut Slot
(LMP) 661A-115
Medium bi-pin fluorescent lampholder for T8 or T12 U-Shaped
lamps with nut slot. 18 ga. bottom slots. 660w / 600v. 1-19/32"H. Lampholders
are suitable for use in fixtures designated for damp or wet locations. Made by Triboro.
CSA - UL Listed.
75¢ each - 50¢ (10+),
25¢ (50+), 15¢ (1,000+)
Fluorescent Lampholder
With Shorting Loop
With Shorting Loop
(LMP) 661A-ESH
Medium bi-pin fluorescent lampholder for T8 or T12 U-Shaped lamps with shorting loop. 18 ga. top, 20 ga. bottom slots. 660w / 600v. 1-19/32"H. Lampholders are suitable for use in fixtures designated for damp or wet locations. Made by Triboro. CSA - UL Listed. Shorting wire is easily detached and can be used as a regular socket.
NOTE: 1,000 pcs = 1 case.
NOTE: 1,000 pcs = 1 case.
50¢ each - 35¢ (10+),
20¢ (50+), 10¢ (1,000+)
(case)
Fluorescent Lampholder
(LMP) G53FA73
Leviton fluorescent lamp holder. T8 only Bi-pin, screw mount. Straight - in double edge, low profile, quick connect. 18 AWG solid / Str tinned 660w-600v. Comes with captive nut and mounting screw. 1" across x 1-1/4"H x 3/4"W.
65¢ each - 50¢ (10+), 43¢ (50+)