Simpson 183 Multipliers |
 |
(MTR) 8562
Simpson 183 multiplier. 500v input, 58,333 ohms, 2,000 ohm / volts. 1-1/4" x 4-1/2" x 3-1/2" high. |
| $25 each |
|
|
(MTR) 8559
Simpson 183 multiplier. 6 meg multiplier.
3,000v input, 2,000 ohm / volts. 4-1/2" x 1-1/4" x 3-1/2" high. New in the box!! |
|
|
Simpson 183 Multipliers |
 |
(MTR) 8554
Simpson 183 multiplier. 2 meg multiplier. 1,000v
input, 2,000 ohm / volts. 1-1/4" x 4-1/2" x 3-1/2" high. |
| $25 each |
|
|
(MTR) 8556
Simpson 183 multiplier. 3 meg multiplier.
1,500v input, 2,000 ohm / volts. |
|
|
|
10 / 20 amp Shunt |
|
250 amp Shunt |
 |
(MTR) B250-50
Meter shunt produces 50 mv @ 250
amps. 1" wide x 3/4" high x 4" long. Made in Canada. |
|
 |
(MTR)
0041196
Weston meter shunt produces
50 mv @ 10 amps or 100 mv @ 20 amps. 1-1/4" wide x 1-7/16" high x 6" long. |
| |
|
Janco Meter Shunt
50 mv / 300 amps |
 |
(MTR) MS91587-4
Janco meter shunt. 50 mv, 300 amp. Bakelite base measures 1-3/4" x 3-1/4" x 9/16"H. |
|
|
Divide 100
DC Shunt |
 |
(MTR)
MX9127
Divide 2.5 or 10 amps into 2.5
or 10 madc. Great for smaller multi-meters. |
|
| |
|
|
"RF" Thermocouple
20 amp |
 |
(MTR)
TH100-20
RF thermocouple
sensor translates 20 amps RF current into 15 mv, 3ma for indication
on panel meter or multimeter. |
|
|
300 amp Generator Shunt
FS = 500mV |
 |
(MTR)
44B9004-3
Avia Products 300
amp generator meter shunt. FS = 500mv. 5.5" long x 4" high
including 3/8" studs. |
|
| |
|
Adjustable Meter Shunt |
 |
(MTR) 10-650081
Adjustable meter shunt. Make your own shunt for many different
meters by adjusting tap until meter reads full scale. 6" long. Resistance is 0.04 ohms. Usable up to 10 amps. For example, at 2 amps, there is 80 mV drop over the full length of the shunt. |
|
|
400 Hz Transducer |
 |
(MTR) 3188
400 Hz transducer. Converts @ 0 - 115 vac, 380 - 420 Hz input to a 0 - 1 madc output signal to drive a standard panel meter. 10 - 32 stud posts in / out. 2-5/8" diameter x 3" high. Useful for any avionic or other 400 Hz power user to monitor line voltage. |
|
|
| |
SSL
|