Switches
Home Page Index Page Switches Pressure Switches & Transducers
 
 
Pressure Switches & Transducers

Pressure Transducer
0 - 1000 psi Range
(SEN) 105901
Transonics pressure transducer. 0 - 1000 psi range. Fluid: gas. Input: 9.999v. Output: Atmospheric 0.535, 600 psi, 9.909. 2.52" diameter x 3.9" high.
 

Pressure Transducer
0 - 3500 psi Range
 
(SEN) PS9610-5D-1
Servonic Instruments pressure transducer. Model H44. 5k ohm, 10 ma. 0 - 3500 psi. 3 pin circular connector for internal pot. 5 vdc reference. 1-1/2" x 1-1/2" x 4" long. 2-1/4" overall height. Units fully field tested. Possibly used.
$169 each
 
$75 each

Pressure or Vacuum
Operated Switch
(SWX) AA9778-51
IMO (Barksdale Controls Div.) pressure or vacuum operated switch. 0.4 - 18 psi (60 psi max) or 0.028 - 1.24 bar (4.14 bar max). Contacts: 10 amp, 125 / 250 vac. Hermetically sealed, electrical connection. 1/2" NPT. Cast aluminum housing. Explosion proof. 4-5/8" x 3-3/4" x 4-1/2"H. Mfg. P/N: DIT-H18. NSN: 5930-01-271-5744.
 

Pressure Transducer
0.744v @ 14.7 psia / 8.719v @ 600 psia

(SEN) 106026
Transonics pressure transducer. 5 ma @ 50ºF, 7500 ohm.

• Range: 0 - 600 psi
• Fluid: Gas
• Input: 9.035v
• Output: 0.744v @ 14.7 psia /
8.719v @ 600 psia
• Dimensions: 2-1/2"D, 3-3/4" overall length
$295 each
 
$149 each

Pressure or Vacuum
Activated Switch
(SWX) D2T-A80
Barksdale Valve pressure or vacuum actuated switch. 160 psi proof. Approximate set value: 1.4 - 2.8 psi. Adjustable range: 0.5 - 80 psi. Switch: 5 amps DC, 10 amps AC, 125 - 250v, 3 amps AC, 480v. Includes 1/4" copper tubing. 3-1/2" x 4-1/2" x 4"H. Brand new!! Removed from new equipment. Zero hours!
 

Pressure Switch
250 psi
(SWX) AP21-2062
Robertshaw AP21-2062 pressure switch. Cut out at 250 psi. Manual cut-in. SPDT contacts. 120v / 240v, FLA 16/8, LRA 96/48. 36" cap tube with 1/4" flare tube with insulated terminal cover. Additional P/N: HP3121-262. NSN: 4130-00-832-9793.
$135 each
 
$45 each - $40 (3+)

Lucas NovaSensor
Pressure Sensor

(SEN) NPH-8-100GH
Lucas NovaSensor pressure sensor. 0-100 kPa (14.5 psi) gage pressure. FSO: 94.00mv. ML: 0.06%. TO-8 pkg. Fiber optics?
 

Airpax DC Transducer
 
(SEN) MAS61
Airpax DC transducer. Wire passes through 9/32" inner diameter hole @ transducer middle. 2" x 2-1/4" x 3"L. Gates / Harris P/N: 741-0001-000.
$35 each - $32 (3+)
 
$75 each

Infinite Resolution
Pressure Transducer
(SEN) 51055
  • Description
  • Specifications

Vernitech infinite resolution pressure transducer. Model 2000. 10k ohm C.I.C. 3 terminal potentiometer. 1/8" male flare fitting. Small size, light weight. Low error under vibration. High voltage output.


• Pressure Range: 20 - 120 psig
• Terminal Resistance: 10k ohms ±10%
• Independent Linearity: ±0.5% F.S.
• Repeatability: ±0.1% F.S.
• Power Rating: 0.10 watts
• Life: To 10 million cycles, depending upon application.
• Temperature Sensitivity: ±0.01% / ºC
• Response Time: 20 milliseconds to respond to 63% of step pressure input
• Temperature Range: -55ºC to +85ºC
• Accleration Error: ±0.2% / G to 20G
• Pressure Media: Gage: any media compatible with Ni-Span-C, Aluminum & Stainless Steel
• Dimensions: 1-1/4"D x 1-5/8"L
 

Pressure Transducer
0 - 2000 psi
(SEN) DAIN-AB
  • Description
  • Specifications

Data Instruments Model AB Pressure Transducer features high signal level, high accuracy and low cost. Useful in tight constraint applications.


• Pressure Range: 0 - 2000 psis (Standardized gage pressure)
• Overload: 2 times rated pressure without damage
• Signal Output: 100 mv at rated pressure
• Exitation Voltage: 5v AC or DC nominal. 6v max
• Sensitivity: 20 mv / V
• Bridge Resistance: Input: 150 ohm, Output: 115 ohm (Germanium bridge)
• Accuracy: Within 1% including non-linearity, repeatability and hysteresis
• Case Material: 15 - 5 PH stainless steel
• Electrical Connection: 3 ft., 4 cond. shielded cable
• Dimensions: Flush diaphragm type, 0.749" diaphragm diameter x 0.935" mounting ring diameter. 1/4" mounting ring thickness. 1.0" OAL not including cable potting
$35 each - $30 (3+), $25 (50+)
 
$79.95 each - $69.50 (3+)

Pressure Transducer
(SEN) LF1430AFS
  • Description
  • Specifications

National Semiconductor pressure transducer. Typical use is to apply 10-16 vdc to red / black wires. Transducer will output 16.7 millivolts DC on green and black wires for every additional psia on 1/4” port. This stainless body can withstand almost any liquid or gas. Practical and scientific pressure monitoring applications are endless.


• Input: 10 - 16 vdc
• Output: 16.7mv / psia
• Range: 0 - 300 psia
• 1/4" NPT port
• Vitan liquid filled diaphragm
• Stainless steel body
• Dimensions: 2-3/16"D x 4"H
 

Pressure Transducer
(SEN) P3061-2WG
  • Description
  • More Info
  • Specifications

The Schaevitz P-3000 Series pressure transducer is self-contained, DC-operated instrument designed to provide DC output voltages and currents which are linearly proportional to applied pressure. Operating from an unregulated source of 10 - 32 vdc at 1.2mA, the P-3061 model transducer provides an output of 0 - 5 vdc.


The aluminum case houses an LVDT assembly and a circuit board containing the electronics to excite the LVDT and amplify the output signal. The LVDT is coupled to a convoluted pressure capsule. The pressure capsule is designed so that its center deflection is proportinal to applied pressure. The lightweight LVDT core and rod reduce the effects of gravity on zero to less than 0.5% of full scale output per g in the lower ranges (inches of water). Built-in stops prevent damage due to minor pressure overloads. Used, removed. Includes instruction / installation manual.


• Electrical input: 10 - 32 vdc unregulated, 1.2mA operating current.
• Pressure Range: 0 - 2 inches H20
• Output: 0 - 5 vdc, 5mA maximum
• Output Impedance: Less than 1 ohm.
• Output Change with Input Voltage Change: Less than 0.1% from 10 vdc to 32 vdc.
• Combined Static Error (Non-Linearity, Non-Repeatability, and Hysteresis: Less than ±0.5% of full range output (best straight line)
$129 each - $109 (3+)
 
$75 each

Hydraulic Pressure
Switch
(SWX) PH8P-61
Precision Sensors, Inc. for Lockheed hydraulic pressure switch. 3 pin MS connector, 1/8" female flare for pressure.
 

Hydraulic Pressure
Switch
(SWX) 80C627
Hathaway Industries hydraulic pressure switch. Adjustable 1700 - 1900 psi. 10 amp SPST contact. 3 pin MS connector, 1/8" female flare for pressure.
$65 each
 
$125 each

3" - 9" Pressure
Switch

(SWX) P-801-DC
Aerotec Industries pressure switch. Non-adjustable 3" - 9" H20. 10 amp contacts. 2 pin MS connector. Two pressure ports.
 

500 - 3000 PSI Switch
(SWX) 6360-3
Aero Mechanism, Inc. adjustable switch for use in aircraft. Field adjust from 500 to 3000 psi., 5 amp, 200 vac SPST contact. 6 pin MS connector. 4-1/4" x 2-7/8" x 1-7/8".
$49 each
 
$375 each

CATV Pressure
Monitoring Switch
(SWX) PEC-525
Pressure guard for monitoring continuous feed cable pressure systems. Pheumatically operated switch.
 

35 PSI
Differential

(SWX) 94662
Robertshaw gas pressure switch has 35 psi differential, non-adjustable. 15 amp double make / double break contacts.
$25 each
 
$10 each

Pressure Switch
0.5 amp Contacts
(SEN) 42G142
Custom Component pressure switch makes on decrease. 0.5 amp contacts. Makes @ 17 psi, breaks @ 12 psi. 75 psi max "proof". Gas or liquid. 1/8" FIP inlet. 3 pin electrical connector (8002-145-7P-FP-A14). NSN: 5930-00-321-0272.
 

Pressure Switch
10 amp Contacts
(SEN) E72-B1-GC-131
BEC Pressure Controls adjustable pressure switch. 0.15 - 1.25" wc range. Dead band: 0.08" wc. Max pressure: 15" wc. Switch rating: 10 amps, 115 vac, SPDT.
NSN: 5930-01-023-9221.
$65 each
 
$75 each
 

7-150 psi Range Pressure Switch
16 amps - 120v
(SWX) P20CA-75
Johnson Controls pressure limit control. Opens on pressure increase of 30 psi. Range is adjustable from 7 to 150 psi (50-100 KPA). 36" long cap tube. 1/4" flare nut.
 
 
$15 each