Power Tap Switches
 

Power Tap Switch
5 Position / 100 amp / 600v

(SWR) C105/AAS/583E
Kraus & Naimer (Austria) power tap switch. 100 amp, 600v. Pointer handle / knob, face plate. 5 position: 5 poles - 4 terminals on each pole. Pole 1: Terminals 1-4, Pole 2: Terminals 5-8, Pole 3: Terminals 9-12, Pole 4: Terminals 13-16, Pole 5: Terminals 17-20. One side of switch is fully strapped (all even numbers). The following describes each of 5 positions of the switch handle. Only contacts that are closed are listed:

• Position 1: 1 - 2, 13 - 14
• Position 2: 5 - 6, 17 - 18
• Position 3: 9 - 10, 11 - 12
• Position 4: 3 - 4, 15 - 16
• Position 5: 7 - 8, 19 - 20

• Dimensions: 3-5/16" diameter x 8-1/4"L
 
 
$350 each
 
 

Power Tap Switch
2P5T / 20 amp
(SWR) 11S4C
Lewis Engineering Co. power tap switch. 2P5T, 20 amp. All terminals silver. Front labeled "Off, 1, 2, 3, 4". 2-3/8" dia. body. Requires 2-1/4" panel opening, 1-1/2" behind. 1-7/8" x 1-7/8" c-c mounting holes. NSN: 3655-00-882-6984.
 
 
$55 each
 

Power Tap Switch
5 Position / 40 Terminals Total
(SWR) A30/AAD/130
Kraus & Naimer power tap switch. 5 position, 40 terminals total. 32 amp, 600v. Lever, knob & pointer. No face plate included. 3-1/2" diameter x 3-5/8".
 

Rotary Tap Switch
3 Phase / 7 Unique Positions
(SWR) PR10-8357
Baco rotary tap switch. 3 phase, 7 unique positions. 16 amp, 500v, 5.5 kw, 12 amps continuous. Includes escutcheon labeled "RT", "ST", "RS", "0", "RN", "SN", "TN". 1-3/4" diameter x 2-1/2". 0.196" x 0.196" x 0.954" square shaft. Space Lab excess.
$95 each
 
$85 each

Power Tap Switch
DPDT / 100 amp / 600v
(SWR) C105-221/E
Kraus & Naimer power tap switch. DPDT, 100 amp, 600v. Two position face plate. Handle / knob / pointer. 3-1/2" x 3-1/2" x 3-1/2" behind panel depth.
 

Power Tap Switch
DPDT / 125 amp / 600v
(SWR) C125A221
Kraus & Naimer power tap switch. DPDT, 125 amp, 600v. Two position face plate. Handle / knob / pointer. 3-1/2" x 3-1/2" x 3-1/2" behind panel depth.
$219 each
 
$250 each

Power Tap Switch
SPDT / 125 amp / 600v
(SWR) 3-S-7574-S23
Kraus & Naimer power tap switch. SPDT. 125 amp, 600v. Includes faceplate and knob. 3-1/2"D x 2-7/8" deep. 5/16" x 5/16" x 1-3/8" square shaft.
 

Power Tap Switch
DPDT / 125 amp / 600v
(SWR) 3-S-7575-S23
Kraus & Naimer power tap switch. DPDT. 125 amp, 600v. Includes faceplate and knob. 3-1/2"D x 4-1/4" deep. 5/16" x 5/16" x 1-3/8" square shaft. Alt. P/N: R1R02 or LR23701.
$195 each
 
$250 each

Tap Switch
4PST / N.O. / 10 - 20 amps / 380 / 660v
(SWR) C10A207EL1SOC6521
Kraus & Naimer C10 tap switch. 4PST, normally open, 10 - 20 amps, 380 / 660v. Spring return - rotary all contacts open unit. Knob turned - spring return. NSN: 5930-01-019-6583.
 

Control Switch
DPDT / Push - Turn / 20 amp
(SWR) 448A118G1X2
General Electric control switch. DPDT. Push - turn. 20 amp. Additional auxillary contacts open when switch handle is pushed in and turned. Contacts closed when handle is release. NSN: 5930-00-574-0206.
$47 each
 
$119 each

Power Tap Rotary Switch
3 Pole 15 Position

(SWR) 303JK16
Power tap rotary switch. 3 pole, 15 position. 5 amp @ 125 vac. Break before make. Watertight. Terminals labeled A thru P. P is common. Position 1 is no connection. Positions 2 thru 16 connect P to A thru, stops can be inserted to limit number of positions. 3-13/16" square mounting plate. Mounting holes on 2-5/16" centers. 3" behind panel. NSN: 5930-00-786-3056.
 

Power Tap Switch
DPDT / 600 vac / 60 amp

(SWR) N17-S61019-8827
Arrow - H&H power tap switch. DPDT. 60 amp @ 600 vac. As operator rotates switch, every other position opens all contacts. Mounts on front panel by 3/8" inner diameter stand-offs. 4-3/4" x 4-3/4" x 5-1/2" behind panel depth.
NSN: 5930-548-4902.
$75 each
 
$139 each

Rotary Tap Switch
SPDT / 10 amp
(SWR) 122902LP
Rotary tap switch. SPDT, 10 amp contacts. 45º indexing. Momentary, center off, 2 pair isolated contacts. Spiffy lever handle. Mfg. P/N: 122902LP. NSN: 5930-00-428-8931.
 

Power Tap Switch
2P1T
(SWR) M15291/6-012
Power tap switch. 2P1T. 30 amp @ 500 vac, 30 amp @ 250 vdc. Switch has 5 positions with contacts made on only one position. 3-1/2" diameter, 3" behind panel depth.
NSN: 5930-01-271-5386.
$47.50 each
 
$45 each

Power Tap Switch
2P3T / 10 amp
(SWR) 122302LM
Electro-Switch power tap switch. 2P3T, 10 amp. 3 position, 45º index. 7/16" bushing mounting hole. Front mount bracket measures 1-5/8" c-c x 4". 2-1/4" behind panel depth. NSN: 5930-01-101-7653.
 

Power Tap Switch
3 Pole / 4 Position (3 + Off)
(SWR) 505A701G01
Westinghouse power tap switch. 3 pole, 4 position (3 + off). 600v, 20 amp, 30º index. 2-1/2" x 3-1/2" x 4-1/2" deep. 2-1/2" c-c mounting bolts. New, unused. Pre-wired. NSN: 5930-826-2287.
$39 each
 
$49 each

Tap Switch
2 Pole / 50 amp
(SWR) 807A785G01
Westinghouse 2 pole tap switch. 50 amp. Rotating front pointer knob from Position 1 - Off - Position 2 makes or breaks that set of contacts. All open in off position. Removable sides. Labeled escutcheon panel. Two pair of contacts: 1 pair made in 'F1', the other pair made in 'F2'. 2-1/2" x 4-1/2" x 6-3/4"L with knob. Made in 1980.
 

Tap Switch
Single Pole Shorting / 125 vac @ 10 amps
(SWR) 32901LB
125 vac @ 10 amps Electro Switch shorting tap switch. Rotates through one to three positions shorted. 1-3/4" diameter, 1-1/4" behind panel.
$65 each
 
$22 each

Power Tap Switch
4 Position / 300 vac @ 30 amps
(SWR) 312-4-T3
Ohmite Model 312 four position power tap switch. 3 phase, 300 vac @ 30 amp. Non-shorting. When switch is in home position #1, a window in dial opens over a small rocker switch. 3" diameter, 7-1/2" behind panel depth. New, pre-wired for Gates transmitter.
 

Power Tap Switch
4 Position / 500v @ 60 amps
(SWR) M1529/8-009
Electro Switch Corp. power tap switch. 4 position, 90º indexing. 500v @ 60 amps. Break before make (over) for connections. 5/16" stud connections. 8-1/2" x 5-1/2" x 7-1/2". 3.156" c-c mounting. NSN: 5930-00-563-7234.
$175 each
 
$150 each

Power Tap Rotary Switch
4 Pole 12 Position / 125 vac / 7.5 amp
(SWR) 26204G
Power tap rotary switch. 4 pole, 12 position. 7.5 amp @ 125 vac. Silver contacts. Break before make. Adjustable stops. 30º indexing. No common, adjacent contacts are connected as rotation occurs. NSN: 5930-01-062-2496.
 

Rotary Switch
2 Pole / 125 vac / 5 amp
(SWR) 33201A3
125 vac @ 5 amps ESCO tap switch with following three positions: Position 1: B-C, F-G. Position 2: A-B, E-F. Position 3: A-C, D-E. 1-7/8" diameter, 1-1/4" behind panel. Includes knob.
$119 each
 
$15 each

Rotary Switch
2 Pole / 125 vac / 10 amp
(SWR) ARR-4P
125 vac @ 10 amps Arrow tap switch with the following four sections: Sections 1&2: 1P4T. Section 4: 1P3T. Section 3: Continuous shorting three of four terminals as rotated. 3-3/4" max outer diameter.
 

Rotary Switch
2P3T / 125 vac / 10 amp
(SWR) 8641BK
Electro Switch power tap switch. 125 vac @ 10 amps. Dual section has two positions plus neutral "off". 2-7/8" square, 2-3/4" behind. Includes knob. 45º index.
$45 each
 
$35 each

Power Tap Switch
2P7T
(SWR) 9000-S6202
ES Corp power tap switch. 2P7T. 10 amp, 125 vac. 5 amp, 125 vdc. 45º index. 2-3/4" square, 2-1/2" behind panel depth. 2-5/16" c-c mounting sockets. NSN: 5930-548-3274.
 

Rotary Switch
3 Position / 4 Poles in Various Configurations

(SWR) C10A017-600EL
Kraus & Naimer 3 position rotary switch. 4 poles in various configurations. 600v, 12 amp. 1-3/4"D x 3" behind panel depth. NSN: 5930-01-189-7287.

4 wafers:
• First: SPDT, center off
• Second: SPDT, center all on
• Third: SPST, on, off, on
• Fourth: off, on, off

Five removable jumpers included.
$50 each
 
$45 each

Power Tap Switch
3 Poles / 8 Descrete Positions

(SWR) S62-74422
Power tap switch. 3 poles, 8 descrete positions each 5 amp, 125 vac. Position 1: Terminals A-B. Position 2: Terminals B-C. Position 3: Terminals C-D and so on around the switch until H-A and then repeat. Continuously rotates but provision for stop screw. NSN: 5930-001-2785.
 

Tap Switch
5 Position / 3 Phase / 35 amp

(SWR) C26C/A272-600E
Kraus & Naimer BLUE LINE 600 vac @ 35 amps (up to 25 hp) tap switch is perfect for switching primary taps, motor winding or any application you need the convenience of selecting multiple taps without rewiring. Removable front escutcheon is 3-7/16" square. Switch body is 2-3/16" behind panel. New in the box.
$45 each
 
$125 each

Power Tap Rotary Switch
5P3T / 125v / 5 amp
(SWR) JL105A3
Esco power tap rotary switch. 5P3T, 125v, 5 amp, 45º index. 2" diameter body x 2.7" behind panel depth. Mounts in 0.47" diameter hole. NSN: 5930-00-016-0402.
 

Power Tap Rotary Switch
5P5T / 125 vac / 5 amp

(SWR) A15110
Electroswitch power tap rotary switch. 5P5T. 125 vac, 5 amp. "H" is common. Can be set up to 7T by moving stop silver plated contacts and screws. 2" diameter, 2-5/8" behind panel depth. NSN: 5930-00-835-9002.
$57 each
 
$75 each

Power Tap Rotary Switch
8 Poles / 1 Position / 500v AC, 250v DC / 30 amp
(SWR) 123108LN
Electro Switch power tap switch. 500 vac, 250 vdc, 30 amp, 90º index. 8 poles, one position. Position 1: All 8 poles connect to 8 lugs on opposite side of switch. Position 2: All open. Position 3: All 8 poles connect to 8 lugs on opposite side of switch. Position 4: All open. 4" diameter body, 5-1/2" behind panel depth. Face lugs @ 3.15" c-c, 1/4 - 20 threads x 2.3" c-c.
 

Power Tap Rotary Switch
13P2T / 500 vac / 3 amp
(SWR) 122613LC
Electro Switch power tap switch. 13 pole, double throw (13P2T). 500 vac @ 3 amps, 250 vac @ 5 amps, 125 vac @ 10 amps. Spare part for nuclear sub. Breaks before make. Includes bar knob and all hardware. 6.94" long x 2.5" diameter. NSN: 5930-01-175-8332.
$165 each
 
$195 each

Power Tap Rotary Switch
14 Poles / Each SPST
(SWR) BM90-1463-2
Power tap rotary switch. 14 poles, each SPST, normally closed. Spring return shaft opens all 14 contact sets with rotation. 10 amps. Rubber shroud insulates each layer, wire / connections. 2-1/4" diameter, 2-3/4" behind panel. 1/4"D x 1/2"L shaft. NSN: 5930-505-4292.
 

Rotary Switch
500 vac / 250 vdc / 60 amp
(SWR) SCC67038-1
Electro Switch power tap switch. 500 vac / 250 vdc. Make before break 60 amp contacts. 2P2T. 7" diameter, 4" behind. 3/8" x 1-1/8" shaft. 90º index.
$35 each
 
$110 each
 

3 Position Tap Switch
(SWR) 466259
Allen Bradley 3 position tap switch. 2" x 2-1/2" x 3-1/4" behind panel depth. 1/4"D shaft.
 
 
$10 each
 
 
SSL