Relays
Home Page Index Page Relays Solenoids - Mechanical Linear
 
 
Solenoids - Mechanical Linear

Linear Solenoid
12 vdc - 12 amps
(MOT) 2586725
Sorensen solenoid. Body is 2-3/16" O.D. x 2-1/4"L. 1-3/32" I.D. plunger hole, 1-1/2" deep. Plunger NOT included.
 

Telephone Relay Armature
(MOT) FTC-159-1159-1
Federal Television Corp. telephone relay armature. Electrical coil. Energize to swing arm. Voltage unknown. 0.62" square x 1.2" high. NSN: 5950-00-562-3685.
$10 each
 
$2 each

Linear Solenoid
12 vdc - 25 Ohm Coil
(MOT) 121P90615/Z2
PED linear solenoid pulls 1-1/4" stroke with 1/2" diameter plunger. End of plunger slotted 1/8". Body 2-3/4" x 1-1/4" square.
 

Linear Solenoid
12 vdc - 12 amps
(MOT) P11489D101
Linear solenoid has 6.5 pounds linear pulling force. 3/8" max stroke. 12 vdc, 12 amps. 2-1/8" outer diameter x 4-1/2" long. 3/16" bore in connecting rod.
$20 each
 
$85 each

Solenoid
24 vdc - 5 ohm Coil
(MOT) 13SD127-1
IMC solenoid. 24 vdc, 5 ohm coil. Piston pulls when energized. 1/2" travel. Solenoid mounts by 3/4" threaded neck. 9/16" diameter piston with #8 threaded hole. 1-1/4"D x 2-1/2"L. Government cost was over $1600 in 1969.
 

Solenoid
24 vdc
(MOT) 10-462-5
Nylon connecting arm. 24 vdc coil. 7/8" x 2-7/8" long x 1-7/8" high. 1/4" travel.
$39 each
 
$15 each

Flange Mount Solenoid
24 vdc
(MOT) 805000901
6/32 tapped piston, 1/2" stroke. 11/16" outer diameter x 2-5/16" long. 24 vdc. Flange mount solenoid.
 

Solenoid
24 vdc
(MOT) 53629-83
Deltrol solenoid. 1/8" x 1" shaft, 3/4" stroke, 1" outer diameter x 2-3/8" behind panel. 24 vdc pulse.
$18 each
 
$22 each

Solenoid
24 vdc
(MOT) S3K5-110
5/16" diameter piston, 4-40 tapped hole, 3/8" stroke. 1/2" diameter x 1-1/2" long. Base flange. 24 vdc, 50 ohm coil.
 

Linear Solenoid
24 vdc / 200 ohm
(MOT) A411-965067-02
Guardian solenoid has 1/8" arm travel. Mounts by bottom #8 hole. 24 vdc, 200 ohm coil. 1-1/2" square x 1-1/4" high.
$14 each
 
$5 each

Solenoid
24 vdc
  Close up view
(MOT) 18286-4
Solenoid, 24 vdc. Catch release - pulls in on energize. Stainless steel. 4 hole flange. 1-1/8" c-c.
NSN: 5945-00-185-1822.
 

Linear Solenoid
28 vdc / 700ma
(MOT) AP
Allied Guardian linear solenoid. 28 vdc, 700ma. 1/4" plunger stroke pulls - spring return out. #6 stud at top of plunger.
1-1/4" x 1-5/8" x 2-1/2".
$75 each
 
$10 each

Electrical Solenoid
20 - 30 vdc
(MOT) ACM26398
Electrical solenoid. 20 - 30 vdc. Push stroke - 1.25 ounces. Stainless steel. NSN: 5945-00-409-0576.
 

Pulling Solenoid
115 vac
(MOT) 2536M1-115
Dormeyer Size 2000 pulling solenoid. 115 vac, 60 Hz, 6.5 amp max stroke, 14.8 ohm, 0.48 amp seated current. 8 - 32 pounds pulling force. 1"W core, 1"L stroke. Measures 2" x 2-1/2" x 2"H.
$85 each
 
$30 each - $27 (3+)

Linear Solenoid
120 vac
(MOT) A420-066883-00L
Guardian linear coin channel solenoid pulls 50.5 oz. at 0.12" stroke, 12 oz. at 0.75" stroke. 120 vac, 85 ohm coil. 1.625" x 1.218" x 1.437" high. 3/4" stroke on pull. Similar to Guardian 16-C-120A.
 

Solenoid
125 vdc - 3 Pound Pull
(MOT) B670
1/2" slotted, drilled piston travels 1". Various tapped mounting hole hole on 3" x 1-13/16" x 1-1/2" high frame. 125 vdc, 1580 ohm coil. 3.02 pounds pull force.
$25 each - $20 (6+)
 
$25 each

Linear Solenoid
230 vac - 2 amps

(MOT) 18CONT230A
Guardian linear solenoid has 4.3 pounds linear pulling force. 230 vac, 2 amps, 60 Hz. 78 ohm coil. 3" x 2-1/4" x 2-1/8" long. 11/32" wide space in fork.
 

Pulling Solenoid
240 vac - 60 Hz
(MOT) 821-103-2
Control Company of America pulling solenoid. 240 vac, 60 Hz coil. 1" travel. 3-3/4"L fully compressed. 3"H x 2-3/8"W.
$15 each
 
$29 each
 

Pull Form Solenoid
550vac @ 60Hz
Solenoid Close up of plunger
(MOT) CR9503209FA
General Electric pull form solenoid. 550 vac @ 60Hz. 2-5/8" x 2-3/8" x 3-1/2"H (fully pulled in).
 
 
$49 each
 

Solenoid Coil
(TM) F3192015
General Electric heavy duty solenoid coil. 2-5/8" x 3-5/8" opening. 2-1/4" thick.
 

Open Frame
Slotted Piston
(MOT) HC-24-DC-AU
Hanell open frame, 3/8" diameter slotted solenoid. Drilled piston travels about 3/4". 8 oz. pull. Base tapped mounting holes. 1" x 2-1/2" x 1-1/4" high frame. 24-30 vdc, 115 ohm coil.
$45 each
 
$22 each

Open Frame
Slotted Piston
Piston
 

Open Frame
Slotted Piston (cont'd)
(MOT) 53414-61
Deltrol. 5/16" diameter slotted, drilled piston travels about 3/4". 15 oz. pull. 7/8" x 1-5/8" x 1-1/16" high frame. 2.8 vdc, 1.4 ohm coil.
$17 each
(MOT) 116757
Hart-Advance. Drilled piston has 10/32 tapped hole, travels about 1/2". 1" x 1-1/4" x 2" high frame. 24 vdc.
$20 each
(MOT) 11DC-C-24VDC
Guardian. 3/8" diameter slotted drilled piston travels about 3/4". Various tapped mounting holes on 1" x 1-7/8" x 1-3/16" high frame. 24 vdc.
 
(MOT) 22C-24
Guardian. As above but 1/4" diameter piston travels about 1/2". 3/4" x 1-1/4" x 3-1/4". 24 vdc.
$15 each
 
$18 each