RF Equipment & Parts
Home Page Index Page RF Parts RF Waveguides Waveguide Assemblies
 
Waveguide Assemblies

AN / TPS-1B
Rigid Waveguide Transmission Line
(MWW) B415340
52" long x 1-1/2" diameter transmission line has angle flange on one end and large female socket at 45º angle on other. These are brand new in foot lockers. Nomenclature marked B415340 and AN/ TPS-1B.
$100 each

Rigid Waveguide Assembly
2.6 - 3.95 GHz

(MWW) 2ZA1300.85
WR-284 flanges (5" diameter with 2.84" x 1.34" opening). 43" center to center long dimension, 12-1/2" c-c on long turn.
 

Rotating Feed Arm Assembly
X - Band

(MWW) AN92862-1
Bendix Radio made this silver jewel for the USN in 1945. 9/16" x 1-15/16" mouth opening in close-up. The long side is 15-1/2" from end back to the opening at the center pivot. We have quite a stash new in the boxes.
$395 each
 
$25 each

Rigid Waveguide
12.4 - 18 GHz

(MWW) R10233
WR-62 flanges, air fitting, waveguide w/ twist, turns.
 

Rigid Waveguide
26.5 - 40 GHz

(MWW) 2350002476
WR-28 flanges, 180º turn, 1-1/2" wide x 1-1/4" deep.
$125 each
 
$45 each

Rigid Waveguide Assembly
5.85 - 8.2 GHz

(MWW) SO-6
WR-137 waveguide (0.622" x 1.372" inside) in double 90 configuration. Oversize rectangular flange ( 2.25" x 3") with 10 holes on one end, round 2-5/8" diameter flange opposite without holes, only lineup bumps. Large rectangular flange above round flange (3-1/4" x 4") has no holes. 12" center to center on flanges. Removable screw on cap top / center has 1/4" wide slot window under cap.
 

Parabolic Feed Assembly
(MWW) FAASY
24" feed assembly with what looks like 7/8" EIA flanges. Silver. Used.
$45 each
 
$25 each

Waveguide Hanger
Clamps

(MWH) 82478-2HJ9
Andrew hanger clamp, 5-1/8" inside diameter.
 

Waveguide Hanger
Clamps

(MWH) 19007A-166
Andrew TOWER hanger kit for supporting 1-5/8" rigid waveguide on tower.
$25 each
 
$65 each