Permacel ® 1 oz.
Copper Foil Tape
|
 |
Expressly designed
for use as electro-magnetic interference (EMI) and radio-frequency
interference (RFI) shielding on small electro-magnetic components
- transformer and reactor coils, instrument and control motors.
Also ideal for printed wiring board modification and repair.
Outstanding
adhesion provided by an insulating, chemically-pure, non-corrosive,
solvent and heat resistant thermosetting acrylic
adhesive. Excellent solderability.
• Insulation class: 155ºC
• Backing material: Electro-deposited copper foil
• Adhesive: Acrylic, thermosetting, solvent resistant, interlined
• Total tape thickness: 3.5 mils / 0.089mm
|
(TAP) P389.625
0.625" wide 1 oz. copper foil tape. 5/8" x
100 ft. roll. |
| $20 each |
|
|
|
Permacel ® Copper Foil
Adhesive Tape
|
 |
(TAP) 340-9219
Permacel copper foil adhesive tape. 3M / Scotch backing
material. 0.066mm (0.00255") copper thickness. 1" wide. Roll weighs 0.9 lbs. 4-11/16"
diameter roll. |
| $39 each - $37 (3+) |
|
|
(TAP) CU-1/.003
Permacel copper foil adhesive tape same as above except
1" wide, 0.003" thick. 4-1/4" diameter roll. Mfg: Johsh. |
| $34 each |
|
|
(TAP) CU-1
Permacel copper foil adhesive tape same as above except
1" wide. Roll weighs 0.786 lbs. 4-3/8" diameter roll. |
| $31 each |
|
|
(TAP) 340-09220
Permacel copper foil adhesive tape same as above except
3/4" wide. Roll weighs 0.673 lbs. 4-5/8" diameter roll. |
|
|
|
| |
Fralock Solid
Copper Strap
with Mylar Insulating Tape Wrap |
 |
 |
| This insulated strap
is used to wind low inductance high current transformers. The Mylar is insulated
between layers of the
winding. |
|
|
|
| |
| Part Number |
Width |
Copper Thickness |
Insulator Thickness |
Overall Thickness |
Diameter Roll |
Notes |
Price |
|
| (TAP) 26804 |
1.000" |
7 mil |
2 mil (0.005") Yellow Mylar |
0.010" |
5-5/8" |
7 mil copper
2 mil polyester film |
62.50 |
|
| (TAP) 27660 |
0.825" |
20 mil |
2 mil (0.005") Yellow Mylar |
0.022" |
7-3/4" |
- |
94.00 |
|
| (TAP) 27833 |
0.656" |
20 mil |
2 mil (0.005") White Polyester |
0.0228" |
8-3/4" |
- |
94.00 |
|
| (TAP) 27860 |
0.940" |
20 mil |
2 mil (0.005") Yellow Mylar |
0.022" |
7-3/4" |
- |
105.00 |
|
| (TAP) 28299 |
1.700" |
22 mil |
2 mil (0.005") White Mylar |
0.0276" |
11" |
- |
250.00 |
|
|
|
|
|
| |
Shorting Bar / Tuning Stub |
 |
 |
| Close up of finger contacts |
(RF) 992-3267
Shorting bar / tuning stub. 2 insulated plates coupled with
slider bar and finger contacts. Silver plated. Contact bar dimensions: 2" x 8". Top
mounting plate dimensions: 3" x 8-3/8". Originally made for Gates transmitter. Gates
P/N: 992-3267-001. |
|
|
| |
|
Copper Mesh Strap |
 |
(RF) STRAP-SCR 2.57" wide punched copper screen mesh comes
in 660 foot rolls. Sold per foot. |
|
|
Universal Copper Strap |
 |
|
(HWX) 412-68641
Universal copper strap. Nickel plated, 14 gauge copper. 0.562" x 3.655" long. |
|
| $2
per ft - $1.50/ft (25+), $1.25/ft (100+
ft) |
|
|
|
| $2 each - $1.75 (10+), $1.50 (100+), $1.22 (500+) |
|
|
|
|
|
Solid Copper
Strap |
 |
|
|
Solid Copper
Strap (cont'd) |
(RF) STRAP.75
3/4" wide hard drawn copper strap for grounding of "RF" equipment.
14 gauge (0.064") thickness. Sold per foot. |
| $5 each - $4 (25+) |
| |
|
|
|
(RF)
STRAP.375S
3/8" wide soft flexible
strap for heavy duty grounding of "RF" equipment.
(0.005") thickness. Sold per foot. |
| 60¢ each
- 50¢ (25+), 40¢ (100+) |
| |
|
(RF) STRAP.5
Tinned copper strap. 0.052" thick, .373" wide.
Great for RF & DC buss lines tank circuits; any high current circuit. Sold
per foot. |
|
|
(RF)
STRAP.75S
3/4" wide hard drawn copper
strap for grounding of "RF" equipment.
(0.005") thickness. Sold in 5 foot lengths only. |
| $6.95 for 5 foot length |
|
|
(RF)
STRAP3
3" wide soft flexible strap
for heavy duty grounding of "RF" equipment. 22
gauge (0.025") thickness. Sold per foot. |
|
| $1.90 each - $1.60 (25+),
$1.35 (100+) |
|
|
|
|
|
|
|
Brass Strap |
 |
 |
(RF) STRAP2B
Brass strap. 2" wide. 0.006" thick. Sold by the foot. |
| $3 per ft |
|
|
|
Copper Strap |
 |
 |
(RF) STRAP2-23
Copper strap. 2" wide. 0.022" thick (23 gauge). Sold by the foot. |
| $2.75 per ft |
|
|
(RF) STRAP2
Copper strap. 2" wide. 24 gauge. Sold by the foot. |
|
|
|
Silver Plated
Strap |
 |
(RF) SILVERSTP
1" x 3" heavy silver
plated strap great for interconnects in a "RF" tank
circuit. 18 gauge (0.040") thickness. |
| $1.50 each - $1.25 (12+),
$1 (25+) |
|
|
(RF) GOLDSTP
Same
1" x 3" strap
as above but GOLD plated. |
| $2.50 each
- $2.25 (12+), $2 (25+) |
|
| |
|
|
Solid Silver Ribbon |
 |
(RF) SILVERRIB092
0.092" wide x 25' long roll of 98% silver, super-flexible
ribbon for use
in "RF" tanks and interconnects. 0.0056" thickness. 24.205 grams/
roll. |
| $87 per roll |
| |
|
(RF)
SILVERSTP125
Silver alloy, exact content unknown. 1/8" wide. 0.02" thick. |
| $3 per ft - $2.50 (5+),
$2 (25+) |
| |
|
(RF)
SILVERSTP250
German Silver alloy. 1/4" wide. 0.02" thick. |
|
| |
|
| $6 per ft
- $5 (5+), $4.25 (25+) |
|
|
|
|
|
|
Silver Anode Flexible Link |
 |
(COL) 652-2009-001
Silver anode flexible link. Surplus from Collins radio. Silver plated beryllium copper. 0.53" inside diameter cap. 5.75" overall length. |
|
|
|
|
Silver Strap |
 |
(RF) 45-5-008
Silver strap, 1/2" wide x 4-1/2" long, 0.008" thick.
1/4" hole
each end. |
|
|
Beryllium Copper Strap |
 |
(RF) 411-61801
Beryllium copper strap. 3-7/8" x 7/8", 0.005" thick. 9/32" hole 5/8" in from each end. 5/32" hole in the middle. Flexible but tough. Nickel plated. |
|
| $4 each - $3.50 (5+),
$3 (25+) |
|
|
|
| $2 each - $1.75 (10+), $1.50 (50+), $1.25 (250+) |
|
|
|
|
|
Solid Copper Strap |
 |
(RF) STRAP-20
Solid copper strap. 20-3/4" long, 3/4" wide, 0.031" thick. 2 x 5/32" x 1/2" slots at one end. 1-1/16" x 5/16" right angle bend at the other end. |
|
|
RF Interconnect Tubing |
 |
(RF) STP151192
RF Interconnect tubing. 3/8" outside diameter, silvered
copper. 5/16" hole - 1 end / flat on other end. 4-1/2" rise, 7" end
to end. |
|
|
|
RF Silver Contact |
 |
(RF) 1289209
RF silver contact on silver beryllium copper strip. 0.375" wide, 3" long overall. NSN: 5999-00-035-9173. |
|
|
Micro Metals Buss Bar,
Ferrite "C" Core |
 |
(ICH) HS135-26
Micro Metals buss bar, ferrite "C" core. 26
mix, yellow. Use bus bar cores for filtering of output bus in switch
mode power supply. Our super, low-profile is rated at 135 amps. Clamp around bus bar
and ty-wrap or tape in place. 3/8" length, 0.718" x 0.3125" x 0.100" x 0.5". Sold in
pairs. |
|
|
|
$2.50 p/pair - $2.25 (10+
pairs), $2 (100+ pairs),
$1.75 (500+ pairs), $1.50 (2,500
pairs) |
|
|
|
| |
SSL
|