(MWA) G382A HP variable attenuator has a dial adjust from 0.1 - 50 dB continuous. 3.95 - 5.85 GHz. 7/8" x 1-7/8" opening, flange 3-5/8" O.D. WR-187 waveguides. UG-407 A/U flanges.
Variable Attenuator 8 - 12 GHz / 0 - 50 dB
(MWA) X382A HP variable attenuator has a dial adjust from 0 - 50 dB. 8 - 12 GHz. WR-90 flanges. 6" x 4-1/4" x 7-1/2" high, 16" long. Removed from service but in good condition.
$295 each
$375 each
Tunable Attenuator 8.2 - 12.4 GHz / 0 - 15 dB
(MWA) 10169G1 Neico tunable attenuator is 0 - 15 dB over the range,
graduated on 3-1/2" dial marked (0-15 and 0-100). WR-90. 2 watt average. 6-1/2" long.
Tunable Attenuator 8.2 - 12.4 GHz / 0 - 20 dB
(MWA) 154AS4 PRD tunable attenuator is 0 - 20 dB over the range.
WR-90. 1 watt average. 2-1/2" long.
$145 each
$85 each
Tunable Attenuator 8.2 - 12.4 GHz / 0 - 25 dB
(MWA) 10136-2 Neico tunable attenuator is 0 - 25 dB over the
range. WR-90. 2 watt average. 4-3/8" long.
Tunable Attenuator 12.4 - 18 GHz / 0 - 40 dB
(MWA) 1387460 MDL tunable attenuator is 0 - 40 dB over the range.
WR-62 waveguide. 8 hole rectangular flange.
$109 each
$95 each
Variable Attenuator 12.4 - 18 GHz / 0 - 60 dB
(MWA) U101-S3G PRD variable attenuator
has a dial adjust from front, 0 - 60 dB. WR-62 (UG-419U) 1 watt
average. 5" high
x 7-1/2" long.
Echo Box 0 - 55 GHz
(MWE) TS-270B/UP This echo box was the original absorption wavemeter for
measuring frequencies in the "GHz" region. "N" female.
(MWA)
C380025133 Systron Donner spare variable
attenuator has a dial marked 20-100 -dBm that was actual read
out on signal generator. Plumbing is WR-62. 5" high x 6" long.
