40 kv to 250 kv Power Supplies
 

Gamma Research Power Supply
Dual Output: 0 to 40kv Positive @ 0 to 7.5 ma
0 to 15kv Positive @ 100 µA

(PS) CRT40-7.5P/100/200
Gamma Research high voltage power supply. Dual output. Front panel analog meters for voltage and current limit controlled by 10 turn pots. Unit also has 0 to 15kv @ 100µA output; voltage controlled on front panel. Current fixed at 100µA. Aux voltage output can be monitored externally. All functions can be remote controlled. Arc protected. Manual included. Molex connector on power cord. Includes HV cable.

• Input: 100 / 200 vac
• Output #1: 0 to 40kv Positive @ 0 to 7.5ma
• Output #2: 0 to 15kv Postive @ 100µA
• Dimensions: 5-1/4"H x 18"D x 19"W
 
 
$3,300
 

Glassman Power Supply
4 kw / 40 kv / 100 ma Positive Output

(PS) PS/LH040P100GHI
Glassman PS/LH040P100GHI power supply. 4 kw, 40 kv, 100ma positive output. AC input on terminal strip on rear panel. Front panel voltage & current adjust. Voltage & current meters. Arc quench senses load arc and shuts down HV output for 20 milli-seconds. Arc count shuts off supply for 5 seconds after 5 arcs @ one per second, then restarts. All functions can be remoted. Includes manual. No cables.
Brand new and unused!!

• Input: 208v, 3 phase
• Output: 0 - 40 kv @ 0 - 100 ma
• Dimensions: 10-1/2"H x 19"W x 24"D
• Weight: 60 lbs
 

Spellman / Bertan Power Supply
0 to 50 kv Voltage Set

(PS) 225-50R
Spellman / Bertan power supply. Model 2828. S/N: 8001. Series 225. Positive or negative output, reversible. Optical encoder for E&I set. 0 to 50 kv voltage set. 0 - 0.3 ma current limit. Has speed sensitive steps. Slow: about 15v / rev. Fast: 10kv / rev. Local analog or GPIB control. Rack mountable. Includes manual & AC cord. No HV cable. Very clean.

• Dimensions: 19"W x 5-1/2"H x 22"D

 
$9,500 each
 
$4,275

Wallis High Voltage, Adjustable, E-Beam Power Supply
+ 180 kv Varian Driver with Single Stack

(PS) A184/55
Wallis high voltage adjustable E-Beam power supply + 180 kv Varian driver with single stack. 5 ma. Factory reconditioned.

The Wallis Hivolt model A184/55 features low ripple and excellent line and load regulation. Input: 120 vac, powered. The system consists of a high voltage driver and external eight stage voltage multiplier stack. Driver is housed in a 5.25" high standard rack mount chassis. The front panel meters are labeled for 0-200 kv and 0-5 ma. The size of the multiplier stack is approximately 19"H x 12"W x 12"L, the stack weight is 20 pounds. Short driver to stack cables are included. High voltage on/off from the front panel. We assume buyers of this system are familiar with its operation. Unit control is from small connector on bottom. We do not have pin out.

NOTE: This is a potentially HAZARDOUS and DEADLY supply. Do not purchase if you do not know what you are doing. Surplus Sales is not responsible for its use or misuse.
$4,900

Advance HiVolt Ion Beam Power Supply
0 to 140 kv @ 0 to 114 ma
Includes 2 Drivers & 2 Stacks

(PS) OL8000/144/08
Advance HiVolt Ion beam power supply. 0 to 140kv @ 0 to 114ma. Input: 208v, 3 phase, 34 amps 48 / 62 Hz.

The OL8000/144/08 supply comprises two identical 140kv rated OL8000 power supplies remotely controlled via a common interface unit. The system operates in a master-slave mode. The master supply operates as a conventional voltage stabilizer supply. The slave supply operates as a current stablilized supply, the current of which, tracks the output current of the master, thereby doubling the output of a single supply. The output rating of the combined supplies is 16kw (114ma) at 140kv with a start-up surge capability in excess of 400ma in the region of 25kv. Each driver / stack is in its own shipping crate. About 300 pounds each with crate. Manual is included. New in original cartons and crates!!
$33,000

Wallis Voltage Multiplier Stack
+100 kvdc - 100ma

(PS) A1006129
Wallis HiVolt high quality voltage multiplier stack. This multiplier was removed from a linear accelerator used for ion implantation. It is extremely dangerous and extremely impressive at the same time. Input is about 14 kvac and obtains +100 kvdc at up to 100 mA output. The output is via a deep drawn aluminum electrode size: 22"W x 17"D x 6"H. The overall height of the stack is 21" with a 21"W x 17" base. Construction is completely modular with eight multiplier stages each on its own PCB. Easy connection of HVAC via two banana jacks on frame. Multiplier weighs 70 lbs.

NOTE: This is a potentially HAZARDOUS and DEADLY supply. Do not purchase if you do not know what you are doing. Surplus Sales is not responsible for its use or misuse.
$3,500 each

Glassman Power Supply
0 to +40 kvdc / 3.5 madc
(PS) LG40P3.5M9
Glassman power supply. 0 to +40 kvdc, 3.5 madc. 5-1/4" x 19"W x 19" deep. Used. No manual or high voltage cable.
*** SOLD OUT ***
 

Glassman Power Supply
60 kv @ 50 ma / 3 kw

(PS) PS/EX0606P050
Glassman power supply was custom made for Varian. Used for Ion implantation. Requires external control circuits for output voltage and current levels. Powers up ok. Digital meters register 0 volts and 0 amps. Used, but in excellent condition.

• Input: 208v, 50 / 60 Hz, 3 phase, Green is ground
• Output: 60 kv @ 50 ma
• Dimensions: 10-1/2" x 19" x 25" deep
$7,500 each
 
SSL