Life Technologies Inc. Model 4000 DC Power Supply
0 - 4000v / 0 - 200 ma / 200 watt Max |
 |
|
(PS) LT4000
Life Technologies Inc. Model 4000 DC power supply. 0 - 4000 volts, 0 - 200 ma, 200 watts max, 115 vac input. Locking pushbutton switches for all range settings. LED indicator for selected range. Individual adjustments for limits on all 3 parameters. Momentary pushbutton selection metering: "Normal" and "Set Reading". Set reading allows pre-setting min & max limits. Then, a momentary pushbutton selects DC on / off. Supply has no output with no load attached. DC on / off is controlled by an internal relay. Dual banana jacks for output connection also has ground leakage LED. Checked out, works great!! This is a very nice supply!
Ranges:
• Voltage: 0 - 500, 0 - 1000, 0 - 2000, 0 - 4000
• Wattage: 0 - 20 watts, 0 - 200 watts
• Current: 0 - 5 ma, 0 - 20 ma, 0 - 50 ma, 0 - 200 ma
|
|
|
|
Matsusada High Voltage Power Supply
Outputs up to 5 kv |
 |
|
|
(PS) HEIM-4135-MSLM1
Matsusada high voltage power supply. Includes power cord and manual (Japanese transation). Multiple high voltage outputs. This unit appears to be the high voltage power supply for a computer controlled optical device. Requires external programming not fully clear from manual.
• Input: 100 vac
• Output: Up to 5 kv
• Dimensions: 19" rack x 6"H x 20"D
|
|
|
|
Kikusui AC Withstanding Voltage Tester
0 - 5 kvac / 0.1 ma - 110 ma in 200 steps |
 |
|
|
(PS) TOS5050
Kikusui AC withstanding voltage tester. Remote controllable and programmable. Includes power cord and manual.
• Input: 115 vac - 240 vac
• Output: 0 - 5 kvac / 0.1 ma - 110 ma in 200 steps
• Dimensions: 12.6"W x 5.91"H x 14.4"D
• Weight: 33 lbs
|
|
|
|
Fluke Power Supply
0 - 2.1 kvdc / 15 ma |
 |
| |
(PS) 412B
Fluke power supply. 0 - 2.1 kvdc in .1v steps. 15 ma. BNC output.
19" rack x 3-1/2" high. |
|
|
Kepco ABC Power Supply
0 - 2.5 kv @ 2 ma Negative Output
|
 |
|
(PS) 188-0030
Kepco ABC power supply. 0 - 2.5 kv @ 2 ma negative output. 8" x 14" x 5" high. |
|
|
|
High Power Pulse Generator
200v - 2.5 kv Peak @ 12.5 amps Peak
|
 |
|
(PS)
VEL360
Velonex high power pulse generator. 200v - 2.5 kv peak @ 12.5 amps peak. 0.05 µS to 3 mS width. 1 Hz - 0.3 MHz PRF. 19" rack width x 22" x 13". Weighs ~ 140 lbs. Model 360. |
|
|
Power Supply
2500 - 3000v
|
 |
| SR-110 Power Supply |
|
(EQP)
AR-150A
Brand new Scientific Radio Systems Power
Supply for the SR-110 Kilowatt Amplifier. Supplies 1 amp continuous. 19" wide
(rack mount), very heavy. Get a load of the huge BASLER hypersil transformer. Oil
capacitor not included. Sold separately or with RF decks. Multi-tapped power
transformer matches any input from 105, 115, 125, 210, 230 & 250 vac. |
|
|
|
High Voltage Power Supply
±3 kv @ 200 ma |
 |
|
(PS) PS/EK03R200-GA1
Glassman high voltage power supply. Digital meters. Front panel voltage & current adjust. Output is SHV connector. Reverse polarity by turning circuit card over inside. Currently set to Negative output. SHV cable NOT included. AC cord included. Used, but in excellent condtion.
• Input: 115 vac, 48 - 63 Hz, 1 phase
• Output: ±3 kv @ 200 ma
• Dimensions: 19" x 3-1/2"H x 23" deep
|
|
|
High Voltage Power Supply
±3 kv @ 200 ma |
 |
|
(PS) PS/EK03R200-JG5
Glassman high voltage power supply. Front panel voltage and current limit. Dual LCD meters. Remote connections or rear terminal strip. Power cord and SHV high voltage cable included. Brand new in factory box!!
• Input: 180 - 220 vac, 48 - 63 Hz, ±10%
• Output: ±3 kv @ 200 ma
• Dimensions: 19" x 23" x 3-1/2"
|
|
|
|
High Voltage Power Supply
0 - 3 kv @ 0 - 150 ma |
 |
|
(PS) PS/WH-03P150X29
Glassman high voltage power supply. SHV positive output connector. Current and voltage controlled by front panel controls. SHV cables available on this page. Works fine to full load. Like new!!
• Input: 115 vac, 48 - 63 Hz
• Output: 0 - 3 kv @ 0 - 150 ma
• Dimensions: 19" x 5-1/4" x 19"
|
|
|
Fluke 4150A Programmable
High Voltage Power Supply
3 kv - 0 - 3 kv @ 0 - 50 ma |
 |
|
(PS) 4150A
Fluke Model 4150A programmable high voltage power supply. Does not work. Sold as-is.
• Output: 3 kv - 0 - 3 kv @ 0 - 50 ma
• Dimensions: 19" x 5-1/4" x 21"D
|
|
|
|
High Voltage Power Supplies
0 - 3 kv (positive or negative) @ 10 ma |
 |
|
(PS) 205B-03R
Bertan high voltage power supply. 0 - 3 kv (positive or negative) @ 10 ma max. Fixed 115 / 230 vac input. MHV high voltage connector. Digital panel meter displays voltage or current. 10 turn pot sets voltage from 0 - 1000. 3 position switch adds 0, 1 or 2 kv to HV. Positive / negative output selected by rear panel switch. Provision for remote programming and control. BMC cord for AC input. Includes manual.
• Input: Fixed 115 / 230 vac
• Output: 0 - 3 kv @ 10 ma max
• Dimensions: 3-1/2" x 19" x 14" deep
|
| $1,100 each |
|
|
(PS) 205A-03
Bertan high voltage power supply same as above except has analog meter. Rear has dual MHV output jacks. Pictures. |
|
|
High Voltage Power Supply
±3.1 kv in / 0.1v Steps / 0 - 30 ma |
 |
|
(PS) 415B
Fluke 415B high voltage power supply. "BNC" high voltage connectors front and rear. HV delay on power up. Wait for stand-by / ready light. Weighs 30 lbs. Includes manual.
• Input: 100 / 115 / 230 vac
• Output: ±3100v in 0.1v steps, 0 - 30 ma
• Dimensions: 3-1/2" x 19" x 15-1/2"
|
| $995 each |
|
|
(PS) 415B/O
Fluke 415B high voltage power supply same as above except "Old Style" front panel. Click here for picture. |
|
|
|
HP DC Power Supply
0 - 4000 vdc @ 50 ma |
 |
|
|
(PS) HP6525A
Hewlett Packard DC power supply. 0 - 4000 vdc @ 50 ma. Regulation = 0.005%. 19" rack x 5-1/4" high. Includes manual copy. |
|
|
Glassman High Voltage Supply
-5 kva @ 20 ma |
 |
|
(PS) PS/EH05N20.OL.11
Glassman high voltage power supply. Output is SHV connector. Analog meters on front panel. Voltage & current adjust. SHV cable NOT included. AC cord included. Rack mountable. Used, but in excellent condition.
• Input: 115 vac, 48 - 420 Hz
• Output: -5 kva @ 20 ma
• Dimensions: 19" x 3-1/2"H x 18" deep
|
|
|
|
Glassman Power Supply
0 to -5 kv, 2 ma Current Limit |
 |
|
(PS) PS/EL05N02.OL11
Glassman power supply. "SHV" output connector. Uses "BMC" AC cord. Works to full output. Only one available. S/N: N185371-02-A070626.
• Input: 115 vac, 48-420 Hz
• Output: 0 to -5 kv, 2 ma current limit
• Dimensions: 19" x 3-1/2" x 17"
|
|
|
DC to DC Converter
Input: 28 vdc - 3 kv / 2 ma |
 |
|
(PS) B1002
DC to DC converter. 28 vdc input yields 3,000-6,000 vdc out
@ 2 ma. 1" x 2" x 4". Commonly used as CRT HV supply. Removed from
equipment. Sold as is. |
|
|
|
Glassman Power Supply
0 to -6 kv, 0 - 25 ma |
 |
|
(PS) PS/ER06N25.OYZ4
Glassman power supply. 1 phase. 0 to -6kv, 0 - 25 ma output via external 10k ohm pots. Controlled through terminal strips on rear. Includes manual & power cord. Optional HV probe available for $150.00.
• Input: 115v, 48 / 63 Hz
• Output: 0 to -6 kv, 0 - 25 ma
• Dimensions: 19" x 3-1/2"H x 19"
|
|
|
Spellman Power Supply
0 - 5 kv @ 10 ma |
 |
|
(PS) RHR5N50
Spellman power supply. Model RHR5N50. Unit powers up. HV meter needle is intermittant. Possibly repairable or use for parts. NOTE: Sold as-is. No returns!!
• Input: 105v - 125v @ 60 Hz
• Output: 0 - 5 kv @ 10 ma
|
|
|
|
|
Korad
Power Supply
0 - 5 kv /
0 - 10 kv |
 |
(PS) D910032-901Q
0-5 kv Korad compact high voltage, variable, rack
mount supply from Los Alamos Lab surplus. Turns counting
voltage control damaged. 7" high, 18" deep. Has 2,500v
0.6 kva transformer. 115 vac input. Sold as-is. |
| * REDUCED * $395 |
|
|
(PS) D910048-901
0-10 kv Korad compact high voltage supply similar
to 5kv unit above. Sold as-is. |
|
|
Power Designs Inc. Model 1570
Power Supply
1 - 3012v - 40 ma output |
 |
|
(PS) 1570
Power Designs Inc. Model 1570 power supply. No manual, no cords. Lights up but no output. Sold as-is.
• Output: 1 - 3012v, 40 ma
• Dimensions: 19"W x 5"H x 18"D
|
|
|
| |
SSL
|
