|
|
|
|
|
Powerstat Variac Driving Motor
75 rpm
|
 |
(MOT) C842200
Powerstat variac driving motor. 115 vac @
0.4 amps, 45/66 Hz. 75 oz. in torque. 75 rpm. 4"D x 5"L, 3/8"D shaft. Made in 1955.
Brand new in the box!! |
|
|
Bodine Motor
1250 rpm |
 |
(MOT) KC1-26
Bodine 230v AC reversable motor has 0.197" shaft
. 0.06 amps, 50 Hz. 2-3/8" square,
2-7/16"long. 0.4 µF capacitor required but not included. |
|
| |
|
|
Appliance Motor
1,550 rpm
|
 |
(MOT) UB09CCH
A.O. Smith shaded pole appliance motor. Cast iron housing. 1,550 rpm, 230 vac, 0.27 amps, 9 watts, 60 Hz. CCWLE (counter-clockwise lead end) rotation. 1/4" x 20" threaded shaft. Mounts on bottom by four #8 screws on 5/8" x 1-1/8" c-c or three #8 screws on back 2-1/2" c-c. UL & CSA listed. |
| $23.50 each |
|
|
(MOT) UB09CWH
A.O. Smith shaded pole appliance motor same as above except CWLE (clock-wise lead end) rotation. 1,550 rpm, 230 vac, 0.27 amps, 9 watts, 60 Hz. 1/4" x 20" threaded shaft. Mounts on bottom by four #8 screws on 5/8" x 1-1/8" c-c or three #8 screws on back 2-1/2" c-c. UL & CSA listed. |
|
|
Appliance Motor (cont'd)
1,550 rpm
|
 |
(MOT) UB09CWL
A.O. Smith shaded pole appliance motor same as left except CWLE (clock-wise lead end) rotation & 1,550 rpm, 115 vac, 0.53 amps, 9 watts, 60 Hz. 1/4" x 20" threaded shaft. Mounts on bottom by four #8 screws on 5/8" x 1-1/8" c-c or three #8 screws on back 2-1/2" c-c. UL & CSA listed. |
| $23.50 each |
|
|
(MOT) 239
Magnetek shaded pole appliance motor same as above left except 1,550 rpm, 115 vac, 0.53 amps, 9 watts, 60 Hz. CCWLE (counter-clockwise lead end) rotation. 1/4" x 20" threaded shaft. Mounts on bottom by four #8 screws on 5/8" x 1-1/8" c-c or three #8 screws on back 2-1/2" c-c. UL & CSA listed. |
|
|
|
|
Dayton Shaded Pole Motor
2710 / 3020 rpm |
 |
(MOT) 9C956
Dayton shaded pole motor. 1/30 horsepower, 115 vac, 50/60 Hz, 1.16 / 1.02 amps, 2710 / 3020 rpm. 5/16" shaft, 15/16"L. 3-1/2" long x 3-1/2" diameter. |
|
|
Dayton Motor
3000 rpm
|
 |
(MOT) 3M725A
Dayton 230 vac, 0.6 amp, 60 Hz, 1/30 horsepower,
1 phase shaded pole motor has 5/16" x
2" shaft. 2-7/8" center - center on mounting studs. Sleeve bearings.
New in the box. |
|
|
|
|
Shaded Pole Motor
1/70 HP - 3000 rpm
|
 |
 |
| Front View |
Rear View |
(MOT) 910-4874
Gould shaded pole motor. Type B-FTP. Thermally protected. 1/70 HP, 3000 rpm, 120v, 60 Hz. CWSE rotation. C frame. Self lubricating. Two 8-32 mounting studs, 1-7/8" c-c. 0.217" diameter x 0.913" long shaft. |
|
|
WSM Motor
|
 |
(MOT) 16320-158
WSM motor with electric rotary brake
(24 vdc actuator). 115 vac, 60 Hz, 0.4 amps. 5/16" x 1-3/4" shaft. 4-5/8" x
4-3/4" x 3-3/4" high.
Includes 7 µF capacitor. 4 pin power plug can be removed. |
|
| $12 each - $11 (6+), $10 (25+), $9 (100+) |
|
|
|
|
|
|
33 Frame Motor
3,000 rpm
|
 |
 |
(MOT) 5KSB33ASE987
General Electric 33 frame motor. Fits Sears appliances. 3,000 rpm, 115 vac, 60 Hz, 0.35 amps, 25 watts. CCW rotation, shaft end. Includes snap-on oil covers. 1/8"D x 2-1/4"L shaft. 1-1/8" x 1-7/8" c-c mounting holes. |
|
|
|
|