|
|
|
|
|
Servo Magnetics
15,000 rpm DC Brushless Motor |
 |
|
(MOT) 000-0222
Servo Magnetics 15,000 rpm DC brushless
motor. • 12 vdc
•
Low noise
•
Precision
long life ball bearings
•
Peak torque: 80 oz-in
•
Torque constant:
1.65 oz-in / amp
•
Shaft: 0.25" x .81"L
•
Body: 2.25"D x 2.23"L
|
|
|
Mabuchi Motor Company
12 vdc Carbon-Brush Motor |
 |
|
(MOT) RS-545SH
Mabuchi Motor Company 12 vdc carbon-brush
motor. CCW / CW rotation. Tapped mounting holes ISO M3.0 x 0.5, two places. Additional P/N: TD071920.
• Operating range: 4.5 ~ 12.0, 12v constant
nominal
• No load speed: 24,000 r/min, 1.30 amps
• Maximum efficiency: 20,510 r/min, 7.65a
• Torque: 31.1 mN-m, 317 g-cm
• Output: 66.7
• Stall torque: 214 mN-m, 2,181 g-cm, 45a
• Dimensions: 35.8mm dia. x 50mm long
|
|
$16 each
$14 (3-24), $13 (25+) |
| |
|
|
$9.95 each - $8.75 (3+),
$ 7.50 (25+),
$6.75 (100+), $5 (1,000+) |
|
|
|
|
|
HP Replacement Motor |
 |
|
(MOT) C6409-60004
HP replacement motor. High torque. 14 point
gear motor. 27 mm diameter. 12 vdc. Very reliable. 1,280 available!! |
|
|
Toy Motor |
 |
|
(MOT) RC280RA1173
Mabuchi Motor makes a gutsy little
Japanese motor suitable for most remote control jobs. 3 vdc,
1" diameter body, 1-5/16" long. Spline shaft 5/64" diameter
x 7/16" long. About 6,400 pieces available. |
|
| $2.50 each
- $2 (10-49), $1.50 (50+) |
|
|
|
| $2 each
- $1.75 (6-24), $1.50 (25-99),
$1 (100+) |
|
|
|
|
|
DC Motor
3 – 4.5 vdc |
 |
|
(MOT) FC280SA-25362A
Mabuchimo Motor DC motor, the same as the stock motor FC280SA-2470. 10,000 rpm, 3 to 4.5 vdc. Double shafted. Originally made to operate an electric razor but perfect for any robotic or novelty project. 2 mounting holes on spline. 11.5mm c-c. Shaft dimensions: 2.0mm (0.0787") shaft, 10.6mm (0.417") long one side, 5.5mm (0.218") long spline side. Body measures: 24.2mm x 18.3mm x 30.5mm long. 20,000 available!! |
|
|
Toy Motor
3 vdc
|
 |
(MOT) BA11101
Mabuchimo Motor toy motor. P/N: RM26, 3 vdc,
29/32" diameter
body, shaft 1/16" diameter.
About 800 pieces available. |
|
$2.50 each - $2 (3+), $1.95 (25+),
$1.50 (100+), $1.25 (1k+) |
|
|
|
|
|
|
|
Exercise Machine Motor
90 vdc / 6000 rpm |
 |
(MOT) B4CPM-060
GS Electric exercise machine motor. 90 volts
DC, 6000 rpm. Universal front mounting flange. Body dimensions: 5"L x 3" dia.
Shaft dimensions: 1/2"
diameter x 1"L. |
|
|
DC Motor
Double Ended Shaft
12 vdc |
 |
(MOT) AS662-019
Clifton DC motor. 12 vdc. Double ended shaft. This
motor won our funky mounting frame award for 2007! |
|
| |
|
|
|
DC Motor
9 vdc / 0.47 amp
/ 19 Ohm |
 |
(MOT) 5023-267
Applied Motion Products DC motor. 19 ohm.
Motor Specifications:
• Rated
for: 9.0vdc @ 0.47 amps
• Holding Torque: 30.5 oz.-in
• Continous Running Torque: 15 oz.-in
• 8 lead, 1.8 deg. step angle, 5% step accuracy, 4 phase winding for hookup in series
or parallel.
• Dimensions: Standard square flange; 2-1/4" with (4) holes for mounting x 1-1/2"L.
Shaft: 0.250" dia. x 1.435"L with flat, connection via 3"L leads.
. |
|
|
| |
| $15 each - $12 (5+),
$10 (50+) |
|
|
|
|
|
|
DC Motor with Optical Encoder
24 vdc / 4600 rpm
|
 |
(MOT) 7K00011
Tohoko Ricoh DC motor with optical encoder.
Tohoko
Ricoh P/N: 52155301.
Motor Specifications:
• 24
vdc, 180 ma., 4600 rpm, 55 watts, no load.
• Lab test: 4000 rpm, 2.3 amps with 12 oz.-in. load applied.
• Stall torque: 70 oz.-in, 10 amps.
Encoder Specifications:
• 2
channel quadrature
• 400 counts square wave / rev., TTL compatible (with pull up resistor.
Dimensions:
• Body: 4-1/8" sq. x 1-3/8"L, (4) holes on 3-3/32" centers
for mounting.
• Shaft: 0.237" dia. with flat x 1-1/8"L.
|
|
|
DC Motor
24 vdc / 5500 rpm
|
 |
(MOT) 403A185
TRW Globe Motors DC motor.
Motor Specifications:
• Rating: 24 vdc, 165 ma., 5500 rpm, no load.
• Stall Torque: 15 oz.-in at 3 amps.
• Torque Constant: 5.5 oz.-in. / amp.
• Armature Resistance: 8.3 ohm
• Body Dimensions: 1-1/2" dia. x 2-5/8"L
• Shaft Dimensions: 0.1562" dia. x 5/16"L with flat.
Face mount with four tapped holes.
|
|
| $35 each - $30 (5+),
$25 (50+) |
|
|
|
| $9.75 each - $8.50 (5+),
$7.75 (50+) |
|
|
|
|
|
DC Permanent Magnet Motor
w/ Encoder -
24 vdc |
 |
(MOT) 429A6004
TRW Globe Motors DC permanent magnet
motor with encoder. Mounts at front tapped holes on 1" center.
Motor Specifications:
• Rated
for: 24 vdc
• Body Dimensions: 1-1/4" dia. x 2-1/8"L
• Shaft Dimensions: 0.098" dia. x 3/8"L. Pulley pressed on (fits 1/4" wide belt).
|
|
|
Governor Controlled Permanent
Magnet DC Motor / 3 - 30 vdc
|
 |
 |
| |
Shaft end |
(MOT) G26/400R
Dunkermotoren governor controlled permanent
magnet DC motor. No load current.
Motor Specifications:
• Rated
for: 3 - 30 vdc
• Governor control adjustable 2850-3200 rpm
• 20 ma. max. continuous torque 85 PCM
• Stall torque: 5 oz.-in.
• Speed without governor: 20,000 rpm at 350 ma.
• Body dimensions: 1.30" dia. x 3"L
• Shaft dimensions: 0.080" nominal (0.0785”) x 0.375"L
|
|
|
|
|
Sankyo DC Motor |
 |
(MOT) BF202R
Sankyo appliance motor with controller
board. 3/8" diameter pulley on shaft. Motor is 1-1/2" diameter.
No additional info on this part. |
|
|
Sanyo Denki
5 vdc Stepper |
 |
(MOT) 103-770-17
Sanyo Denki 5 vdc @ 1 amp stepper motor. 1/4" shaft,
1" long.
2-1/4" square face, 2-1/16" long. 1.8 degrees / step. Small quantity. |
|
| |
|
|
Industrial Motor
13.2 vdc |
 |
(MOT) MET-3RF2B
Matsushita hi-torque motor can surprise you.
Draws only 200ma at 13.2 vdc, but she rocks! 1-3/8" O.D. x 15/16" deep. 5/64" shaft
diameter x 5/16" long. Mounts by 6 threaded holes on face. |
|
|
PMI Torque Motor |
 |
 |
| Rear |
Front |
(MOT)
U12M2
12 vdc supply voltage, 3/8" x
1-3/16" shaft. 5-1/4" outer diameter x 2-7/8" deep.
Threaded holes in face for mounting. Ball bearing. Highest
possible quality. |
|
| $9 each - $8 (6-12),
$7.50 (13-49), $6.95 (50+) |
|
|
|
|
|
|
|
|
