|
|
|
|
|
Air Flow Switch
SPDT |
 |
(SWM) E51-00E
Cherry air flow switch. SPDT. Spring arm included. No sail. |
|
|
70 CFM Filter
8" x 8" |
 |
(AHD) 87000834-2
Cambridge Filter Corp high efficiency
(99.97%) replaceable HEPA filter box has rubber gasket on each face. 8" square
x 6-3/4" deep. |
|
|
|
Air Duct Hoses |
 |
(ADH) 8A08CH046
2" diameter x 15-1/2" long Flex-Fab mil-spec, helically
wound with one continuous wire support, circular air duct for routing cooling air for
equipment. Will turn sharp radius without losing form. |
| $19 each |
|
|
(ADH) 8A12CH104
3" diameter x 30" long, otherwise as above. |
| $32 each |
|
|
(COL) 009-1804-050
5" diameter x 48" long, otherwise as above. |
|
|
Air Duct Hoses (cont'd) |
|
(ADH) AERODUCT
Aeroduct air duct hose. Helically wound - continuous wire support. 1-1/2"D x 18"L. Red. |
| $19 each |
|
|
(ADH) 009-1468
Flex Fab air duct hose. Mil-spec. Helically wound - continuous wire support. 2"D x 19"L. Black. |
| $22 each |
|
|
(ADH) 009-1804
Flex Fab air duct hose. Helically wound - continuous wire support. 2-1/4" x 13"L. Black. |
|
|
|
|
RF Honeycomb Screen |
 |
 |
Threaded
#8 mounting holes |
|
(FRI)
60-71326
2-3/4" x 8" x 3/4" thick. Made from ultra
strong T6063 aircraft aluminum. Mounts from rear with six threaded #8 holes.
No holes will show on
outside. Braid and rubber compression gaskets for air and RF tight
seals. Perfect size to incorporate one or two into chassis, side by side
or stacked. 60 dB attenuation.
Keeps
the RF signals in while moving air in or out of the chassis. Shielded
intake screens for amplifiers make no air noise, have no back pressure. RF compression
and rubber gaskets for RF tight seal. |
| $25
each - $22 (3+) |
|
|
(COL)
753-0270-001
6-1/4" x 21" x 3/4" thick.
26 mounting holes penetrate front to back. 60 dB attenuation. Otherwise
same as above. |
|
|
|
|
|
Fan Finger Guard |
 |
|
(FAN) 476136
Fan finger guard for Tarzan fans. Made of steel wire finished in nickel chrome. |
|
|
Fan Cover |
 |
| |
(FAN) 412-68628
Fan cover. Zinc plated. 4-5/8" x 5-3/8". Made for Power One power supplies. |
|
|
|
Washable Air Filter |
 |
(FAN) 6032-1069
Washable air filter. Aluminum housing, foam medium. 6-3/16"
x 6-3/16" x 3/8" thick. |
|
|
Aluminum Fan Guard |
 |
(FAN) 6032-1070
Aluminum fan guard. 1/4" squares. Black. 5-1/2" x
6-1/2" |
|
|
|
Aluminum Fan Guard |
 |
(FAN) 6032-106802
Aluminum fan guard. 1/4" square holes. Black. 4-3/4" square. |
|
|
Plastic "Retro" Grille |
 |
(FAN) 16238
Rotron plastic "retro" grille made for 4-5/8" square muffin fan.
Overall dimensions: 5-1/8" x 6-1/8". 4-5/8" recess on rear. |
|
|
|
Shielded, Wire Impregnated
Clear Plastic Lens |
 |
 |
| Close-up view |
(PLS)
SCRNWIN-1
Peek in on the glow of your finals
through this RF proof plastic
lens without letting the signals escape. Full size is 7-15/16" x 4-3/16".
Notice our close-up shot of the fine wire screen so small you can't even see
it from 12" away. 1/4" wide perimeter gasket. |
|
|
Fan Guard |
 |
(FAN) GARD
4-3/8" outer diameter dark
blue / black circular fan guard. 120 degrees slotted mounting
holes. |
|
|
|
|
Squirrel Cage |
 |
(FAN) SQCG1
Galvanized squirrel cage for blower.
4-3/4" diameter x 3-3/8" wide. 5/16" shaft. |
|
|
Squirrel Cage |
 |
(FAN) SQCG4
Gray enameled squirrel cage for blower.
5.5" diameter, 2-3/8" wide. 1/2" shaft. |
|
|
|
|
Aircraft |
 |
Surplus Sales of Nebraska stocks
100's of 400 Hz aircraft blowers, fans, transformers and other
compnents related directly to the airborne industry. Consult
our ILS listings or call direct for availability and pricing
on any part you may need. |
|
|
|
Tube Axial
330 cfm @ 12" H2O |
 |
(FAN) M4942D-2A
Dynamic Air Engineering military
aircraft high volume blower. 300 cfm @ 12" H2O! 1.5 HP. 27 vdc, 42
amps, 12,550 rpm. 6" diameter x 10.5" long. New! |
|
|
|
|
|
