Shock Mounts

Rubber Disk
Shock Mount
(RPS) 12324033-2
Mechanical Rubber Products rubber disk shock mount. 45º chamfer on center hole. 3.25" diameter, 1.25" inner diameter, 0.68" high. We do not know the weight range of this material. NSN: 5330-01-201-4803.
 

Electrical Insulator

(RPS) 60/40
Electrical insulator. Rubber mount, elastomer polychloroprene. 1.575" semi-circle, 2-3/8" square block.

NSN: 5975-01-034-5536.
$3 each - $2 (6+), $1.50 (25+), $1 (100+)
 
$5 each - $4 (10+)

Rubber Pad
Shock Mount

(RPS) V45J155
GE rubber pad shock mount. 1/4"H. 3" x 3". 1/2"D hole centered 1" from top.
 

Wire Rope
Resilent Mount
(RPS) 4037267C
United Technologies wire rope resilent mount. 25 lbs load rating. 0.090" diameter rope. 1" high x 1-1/2" coil. 1/2" x 4.39" mount flange. 3.95" c-c mounting holes. 5340-00-385-9258.
$2.50 each - $2 (6+)
 
$119 each

Circular Arch Wire Rope
Isolator for Aircraft

(RPS) CA4E-506-TX
Aeroflex Int. Inc. circular arch, wire rope isolators for aircraft. 1/8" wire ropes. Load range = 5 - 20 lbs each. Aeroflex CA4 series. 2" high uncompressed. 3" diameter base, 1.5" diameter top plate with 1/4" x 20 hole.
 

NOS Shock Mount

(RPS) M64-AA-40
We were recently shocked to find a large stash of this great mount. Original Barry Mounts new in boxes but probably 40-50 years old! 20-40 pounds weight range each or 80-160 pounds per set of 4. 1-1/2" high, no load. 2-3/8" square base, 1/4" mounting hole at center. Mounting holes are 7/32" on 1-15/16" centers. Diagonal distance of mounting holes is 2-3/4".
$65 each - $60 (4+), $54 (25+)
 
$12 each - $10 (10+)

Shock Mount
(RPS) 5150C
U.S. Rubber shock mount. 2 - 10 lbs range. Center hole (0.255" diameter) unthreaded. May use 1/4" through-bolt to secure equipment. 2-3/4" square base plate, 1-1/8" high. 1.93" c-c mount holes. Cadmium plated. Chalk residue / preservative rubs off to shiny surface. Manufactured in the 1950s.
 

Shock Mount

(RPS) 200-XPH-75
Lord shock mount. 75 lbs load rating @ 1/16" deflection. 0.391" diameter mount hole, unthreaded. 3" square base,
2-1/2" c-c mount holes. 2-3/8" high. New, old stock. Cleans up nicely.
$7 each - $6 (10+)
 
$22 each - $20 (10+), $18 (50+)

Barry Controls
Shock Mount

(RPS) C-1035-T4
Barry Controls cup style shock mount. Zinc plated. 25 - 35 lbs load rating. 0.011 - 0.032" deflection. Solid rubber resilient member. 2-3/8" x 2-3/8" x 1-1/8"H. 1-15/16" c-c mounting holes. 0.195" diameter. 1/4 - 20 mounting hole.
 

Barrymount
Shock Mount

(RPS) 5205-HT
Barrymount shock mount. 4 to 7 pounds each. 2.4" square base, 1.5" high. 10 - 32 thread.
$10 each - $8.50 (10+)
 
$12 each - $10.40 (5+)

Rubber Shock Mount
(RPS) SM.5
Rubber shock mount. #8 brass stud on top & bottom. 9/16" diameter x 1/2" high.
 

Giant Shock Mount
(RPS) 15P550A
Giant shock mount handles 550 pound loads. 6-1/2" center to center on ear holes. 4-1/2" high. Steel frame. Rubber cushions. 550 lb load rating at 15 Hz. Cage 81860.
*** SOLD OUT ***
 
 
$65 each

Rubber Shock Mount

(RPS) 426-0001
Rubber shock mount. 5/8" high. 1/2" diameter flange. Gates P/N: 426-0001-000.
 

Rubber Shock Pad
(RPS) 424-0126
Rubber shock pad. No internal seat. 1-1/4" diameter x 0.4" thick, 0.566" overall height. 3/8" diameter hole. 1/2" outside diameter shoulder. Gates P/N: 424-0126.
$1.50 each - $1.25 (10+)
 
$1.50 each - $1.25 (6+), $1 (25+)
 
SSL