Nickel Chrome Clasp |
 |
 |
| Assembled |
Backer, Hasp & Clasp |
(HWX) F133
Anchor Lion nickel chrome clasp. Presses into cardboard or light wood. Set includes backer, hasp and clasp. 1.37" x 0.96". 10 dozen pieces per box. 132 boxes available. |
|
|
Panel Latch Wire Cam |
 |
(HWX) 448-0664
Southco panel latch wire cam. 1.944" c-c flange mount holes. (1). Drill 0.6" hole indoor. (2). Mount latch from back side. (3). Snap knob into place. Harris P/N: 448-0664-00. |
|
| 25¢ each - 20¢ (12+), 15¢ (120+) (box), 12¢ (1k+) |
|
|
|
|
|
|
|
| $7.95 each - $7.50 (10+), $7.30 (25+) |
|
|
|
|
Cabinet Lock Cylinder |
 |
(HWX) 2009-36Z
IBM cabinet lock cylinder with arm, mounting clip. Includes two keys. 1" or 1-1/4" CL latch. 0.589" diameter bezel. Requires 0.46" diameter hole, 3/4" behind panel depth. |
|
|
Cabinet Latch |
 |
(HWX) LCH-15
Cabinet latch. Solid bronze. Keeper plate requires pilot hole in front panel. Arm: 1.5" EC. Knob: 1.5" wide. |
|
| $4.95 each - $4.25 (6+), $3.75 (25+) |
|
|
|
|
|
|
Steel Latch / Catch |
 |
(HWX)
PP297613
Steel latch / catch. 1-3/8" x 2-1/4" x 5/16" lip. 1" c-c mounting holes. |
|
|
Safety Latch for
C-L Hooks |
 |
(HWX) S4055
Fits the following C-L load rated hooks: S4055A, S4055B, S4055C,
instructions included. |
|
|
|
Locking Cabinet
Latches
|
 |
Latching Arm Assembly |
(HWX)
10936971
A heavy duty plated steel cabinet
latch made for locking rack doors or ?? 3" x
3-5/8" opening required for mounting. 33-1/4" maximum extended arm
length. 3 keys included. Made for US Military. |
|
|
Recessed Cabinet /
Door Latch |
 |
 |
| Unlocked |
Locked |
(HWX) LCH-11
Southco Inc. recessed cabinet / door latch. Lift hand to rotate (unlock), rotate clock-wise to re-lock and stow handle. Plate size: 3-1/2" x 4-1/2". Hole size: 2-1/2" x 3-5/8". |
|
| |
|
|
Adjustable Grip
Latches
|
 |
(HWX) LCH-9
9/16" diameter x 15/16" projection. Mounting 1-3/4" long
x 7/8" wide.
Holds doors and covers shut without precise alignment. Right hand locking, slotted
for screwdriver operation. |
|
|
1/4 Turn
Pawl Latches |
 |
(HWX) LCH-8
Cylinder size 9/16". Overall length 1-5/8". Flated shaft for knob or
handle. Turn 1/4 turn to lock or unlock, turn further if you wish to increase
locking tension. 1/2" mounting hole. |
|
| |
|
|
Positive Locking
Draw Latches |
 |
(HWX) LCH-4
1-7/8" wide, 2-1/8" overall length open. |
| $4 each |
|
(HWX) LCH-1
Same as above except 2" overall length open. |
|
|
Positive Locking
Draw Latches |
 |
(HWX)
LCH-2
Same as left except, 1-7/8" wide,
1-11/16" overall length open. |
| $4 each |
|
| |
|
| |
|
|
Positive Locking
Draw Latch |
 |
(HWX) BP-12334
Positive locking draw latch. Recessed flush mount. Nickel plated steel. 1"W x 1-3/8"L x 5/8" deep. Flanges 2-1/4" x 1". 1-13/16" c-c mounting holes. 1-7/8" closed, 2-1/16" open. |
|
|
Cam Lock
5-Disk Tumbler |
 |
(HWX) KEYMED
3/4" diameter cylinder. Key lock for extra security on
cabinet or panel. Washers included. Medco C8052. |
|
| |
|
|
Catches |
 |
(HWX) C1
5/8" wide, 5/8" deep. Metal
catch for spring loaded latches. Screw
mount. |
|
|
Catches |
 |
(HWX)
C2-RA
1-3/16" wide flange, 3/4" deep
x 5/16" high. Screw mount holes
7/8" centers. Mount this catch on parallel surface like the lid. |
|
| |
|
|
Rod or Bar
Latches |
 |
(HWX) LCH-71C-8-W
1-9/16" wide, 1-1/4" height.
1/2" rod or bar diameter. Spring loaded, locks into
place. |
|
|
Barrel Bolts |
 |
(HWX) LCH-10
1-3/16" x 3", shaft length 1". Slide the barrel
into the groove and snap the bolt action lock down for immovable security. Solid brass. |
|
| |
| |
SSL
|
